AD8544ARZ vs AD8542AR-REEL7

AD8544ARZ과 AD8542AR-REEL7에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8544ARZ and AD8542AR-REEL7 are both single-supply CMOS operational amplifiers from the same AD854x family, sharing identical per-channel AC and DC performance characteristics. The primary distinction is channel count: the AD8544ARZ integrates four amplifiers in a 14-lead SOIC package, while the AD8542AR-REEL7 provides two amplifiers in an 8-lead SOIC package. For designs requiring fewer channels or a smaller footprint, the AD8542AR-REEL7 is a viable functional substitute, provided the board layout is revised to accommodate the different package and pinout. Designers should confirm channel count requirements and verify PCB footprint compatibility before substitution.

Channel Count Validation required
Package Type Validation required
Supply Voltage Range High match
Gain Bandwidth Product High match

Parts at a glance

Part A

AD8544ARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
4354 PCS
Package
SOIC-14
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
Part B

AD8542AR-REEL7

아날로그 디바이스(주)

Lifecycle
Active
Stock
3749 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8544ARZ AD8542AR-REEL7 Why it matters
Number of Amplifiers 4 (Quad) 2 (Dual) Determines how many independent op-amp channels are available in a single package; a quad cannot directly replace a dual in a board layout expecting two channels.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Both parts operate over the same single-supply range, so power rail compatibility is preserved when substituting.
Gain Bandwidth Product 1 MHz 1 MHz Matching bandwidth ensures similar AC signal handling and closed-loop response in the target circuit.
Input Offset Voltage (Max) 6 mV 6 mV Identical offset spec means DC accuracy and error budget remain consistent between the two parts.
Input Bias Current 1 pA (typ) 1 pA (typ) Very low CMOS input bias current suits high-impedance sensor interfaces; matching values preserve input loading behavior.
Supply Current per Amplifier 45 µA (typ) 45 µA (typ) Low quiescent current is critical for battery-powered designs; equal per-amplifier draw keeps power budgets comparable.
Slew Rate 0.92 V/µs 0.92 V/µs Identical slew rate ensures similar large-signal transient response and stability margins.
Package / Pin Count 14-lead SOIC 8-lead SOIC Different package footprints and pin counts mean the parts are not drop-in replacements; PCB layout must accommodate the respective package.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Both cover the industrial/extended range, so environmental compatibility is equivalent for substitution purposes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8544ARZ AD8542AR-REEL7
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type General Purpose General Purpose
Number of Circuits 4 2
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.92V/µs 0.92V/µs
Gain Bandwidth Product 1 MHz 1 MHz
Current - Input Bias 4 pA 4 pA
Voltage - Input Offset 1 mV 1 mV
Supply Current 45µA (x4 Channels) 45µA (x2 Channels)
Current - Output / Channel 30 mA 30 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 5.5 V 5.5 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8544ARZ and AD8542AR-REEL7?

The AD8544ARZ is a quad (four-channel) rail-to-rail CMOS operational amplifier in a 14-lead SOIC package, while the AD8542AR-REEL7 is a dual (two-channel) rail-to-rail CMOS op amp in an 8-lead SOIC package supplied on a 7-inch reel. Both share the same 2.7 V to 5.5 V supply range, 1 MHz gain bandwidth product, and rail-to-rail input/output architecture, but differ in channel count, package pin count, and packaging format.

Are the AD8544ARZ and AD8542AR-REEL7 electrically identical per channel?

Yes. Both devices are members of the AD8541/AD8542/AD8544 family and share the same per-channel specifications, including a 1 MHz gain bandwidth product, 0.92 V/µs slew rate, and rail-to-rail input and output swing. The primary differences are the number of integrated channels and the package/packaging format.

Can the AD8542AR-REEL7 be used as a drop-in replacement for one channel of the AD8544ARZ?

No, they are not pin-compatible drop-in replacements. The AD8544ARZ is a 14-lead SOIC quad device, while the AD8542AR-REEL7 is an 8-lead SOIC dual device. Pin count, pinout, and PCB land pattern differ, so a board redesign or layout change is required when substituting between them.

What supply voltage range do both the AD8544ARZ and AD8542AR-REEL7 support?

Both devices operate from a single supply of 2.7 V to 5.5 V, and they are also specified for dual-supply operation of ±1.35 V to ±2.75 V. This makes them suitable for low-voltage, battery-powered, and portable signal-conditioning applications.

What are the input and output characteristics of these amplifiers?

Both the AD8544ARZ and AD8542AR-REEL7 feature rail-to-rail input and output (RRIO) capability, allowing signal swing to both supply rails. They have a typical input offset voltage of 1 mV (3 mV maximum) and low input bias current, which supports high-impedance sensor interfacing and single-supply signal conditioning.

What packaging options distinguish the AD8544ARZ from the AD8542AR-REEL7?

The AD8544ARZ is supplied in a 14-lead SOIC (R-14) tube or tray format, while the AD8542AR-REEL7 is supplied in an 8-lead SOIC (R-8) on a 7-inch tape-and-reel, making it suited to automated high-volume SMT assembly lines. The reel suffix indicates the tape-and-reel packaging rather than a different silicon die.

Which applications are better suited to the quad AD8544ARZ versus the dual AD8542AR-REEL7?

The AD8544ARZ is preferable where four independent amplifier channels are needed in a compact footprint, such as multi-channel sensor signal conditioning, active filters, and instrumentation front ends. The AD8542AR-REEL7 is better suited to space-constrained dual-channel designs and high-volume automated assembly, such as portable medical devices, handheld instrumentation, and battery-powered monitoring systems.

Do both devices share the same temperature range and process technology?

Yes. Both the AD8544ARZ and AD8542AR-REEL7 are specified over the industrial temperature range of −40 °C to +125 °C and are fabricated using Analog Devices' CMOS process, providing low power consumption and stable performance across the operating range.