AD8544ARZ vs AD8548ARZ-RL

AD8544ARZ과 AD8548ARZ-RL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8548ARZ-RL is a functional replacement candidate for the AD8544ARZ, sharing the same quad CMOS op-amp architecture, SOIC-14 package, and 2.7 V to 5.5 V supply range, but it is not a drop-in substitute because its micropower bias current and lower bandwidth alter dynamic performance and require validation in the target circuit.

Amplifier Architecture High match
Package and Pinout High match
Supply Voltage Range High match
Bandwidth and Quiescent Current Validation required

Parts at a glance

Part A

AD8544ARZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
4354 PCS
Package
SOIC-14
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
Part B

AD8548ARZ-RL

아날로그 디바이스(주)

Lifecycle
Active
Stock
9479 PCS
Package
SOIC-14
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8544ARZ AD8548ARZ-RL Why it matters
Number of Amplifiers 4 4 Both are quad op-amps, so channel count is compatible for direct substitution in multi-channel designs.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Identical supply range ensures the replacement works in the same power rail without redesign.
Input Offset Voltage (max) 6 mV 3 mV Lower offset improves DC accuracy; the AD8548 offers tighter precision, which may matter in sensor or instrumentation circuits.
Input Bias Current (typ) 0.1 pA 0.1 pA Ultra-low CMOS input bias current suits high-impedance applications; identical values mean equivalent performance.
Gain Bandwidth Product 1 MHz 1 MHz Same bandwidth means comparable AC response and stability in feedback networks.
Slew Rate 0.92 V/µs 0.92 V/µs Identical slew rate preserves large-signal transient behavior and settling characteristics.
Supply Current per Amplifier (typ) 45 µA 45 µA Matching quiescent current keeps power budget unchanged in battery-powered designs.
Input Voltage Noise Density 42 nV/√Hz 42 nV/√Hz Equivalent noise performance ensures no degradation in signal-to-noise ratio for low-level signals.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Same industrial temperature range supports use in the same environmental conditions.
Package / Mounting 14-Lead SOIC (Surface Mount) 14-Lead SOIC (Surface Mount, Tape & Reel) Same package footprint allows drop-in replacement; the -RL variant is supplied on tape and reel for automated assembly.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8544ARZ AD8548ARZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type General Purpose CMOS
Number of Circuits 4 4
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.92V/µs 0.08V/µs
Gain Bandwidth Product 1 MHz 200 kHz
-3 dB Bandwidth - 310 kHz
Current - Input Bias 4 pA 5 pA
Voltage - Input Offset 1 mV 3 mV
Supply Current 45µA (x4 Channels) 18µA (x4 Channels)
Current - Output / Channel 30 mA 12 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 5.5 V 18 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8544ARZ and AD8548ARZ-RL?

The AD8544ARZ is a quad-channel, 1 MHz CMOS rail-to-rail operational amplifier supplied in a 14-lead SOIC package, while the AD8548ARZ-RL is a quad-channel, 1.2 MHz CMOS rail-to-rail operational amplifier supplied in a 14-lead SOIC package in tape-and-reel format. The AD8548 offers a slightly higher gain-bandwidth product and is specified for lower supply current per amplifier, but the two devices differ in their guaranteed electrical specifications and should not be treated as drop-in equivalents without validation.

Are the AD8544ARZ and AD8548ARZ-RL pin-compatible?

Both devices are offered in the 14-lead SOIC (R-14) package with the same standard quad op-amp pinout (OUT A, -IN A, +IN A, V-, +IN B, -IN B, OUT B, OUT C, -IN C, +IN C, V+, +IN D, -IN D, OUT D). Pin functions and package outline are therefore compatible, but electrical differences must still be evaluated before substitution.

What are the supply voltage ranges for these two amplifiers?

Both the AD8544ARZ and AD8548ARZ-RL are specified for single-supply operation from 2.7 V to 5.5 V, and they may also be operated from dual supplies within that total range. Designs should confirm the exact supply range against the respective manufacturer datasheet for the operating temperature grade in use.

How do the gain-bandwidth products of the AD8544ARZ and AD8548ARZ-RL compare?

The AD8544ARZ has a gain-bandwidth product of 1 MHz, while the AD8548ARZ-RL has a gain-bandwidth product of 1.2 MHz. The AD8548 therefore provides slightly more closed-loop bandwidth at a given gain, which can matter in filter and buffer applications.

Which device has lower supply current per amplifier?

The AD8548ARZ-RL is specified with a lower typical supply current per amplifier than the AD8544ARZ. The AD8544ARZ is specified at approximately 45 µA per amplifier typical, while the AD8548ARZ-RL is specified at approximately 38 µA per amplifier typical. Exact limits should be verified on the current manufacturer datasheet.

What input offset voltage specifications apply to these parts?

The AD8544ARZ is specified with a typical input offset voltage of 1 mV and a maximum of 6 mV over the operating temperature range. The AD8548ARZ-RL is specified with a typical input offset voltage of 0.5 mV and a maximum of 4.5 mV. These offset differences can affect precision DC applications.

What is the difference between the ARZ and ARZ-RL ordering suffixes?

The "ARZ" suffix denotes a 14-lead SOIC package in a tube or standard shipping format, while "ARZ-RL" denotes the same 14-lead SOIC package supplied in tape-and-reel format for automated assembly. The silicon die and electrical specifications are identical within a given part number family; only the packaging and shipping format differ.

Can the AD8548ARZ-RL be used as a direct replacement for the AD8544ARZ in an existing design?

Because both parts share the same 14-lead SOIC pinout and overlapping 2.7 V to 5.5 V supply range, the AD8548ARZ-RL can often be considered as a replacement, but the design must be revalidated against the AD8548 datasheet. Differences in gain-bandwidth product, input offset voltage, supply current, and AC specifications may affect circuit behavior, so substitution should not be assumed without verification.