ADA4077-2ARZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 5777 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
ADA4077-2ARZ과 ADA4004-4ARZ-RL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADA4077-2ARZ and ADA4004-4ARZ-RL are not drop-in replacements for each other. The ADA4077-2ARZ is a dual-channel precision operational amplifier in an 8-lead SOIC package, while the ADA4004-4ARZ-RL is a quad-channel precision operational amplifier in a 14-lead SOIC package. The difference in channel count, package footprint, and pinout makes direct substitution impossible without a board redesign.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4077-2ARZ | ADA4004-4ARZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 4 | Determines how many independent op-amp channels are available in a single package, directly affecting circuit density and channel count. |
| Input Offset Voltage (Max) | 25 µV | 125 µV | Lower offset voltage improves DC precision and reduces output error in high-gain or precision signal-conditioning applications. |
| Input Voltage Noise Density (1 kHz) | 7 nV/√Hz | 10 nV/√Hz | Lower noise density yields better signal-to-noise ratio for low-level sensor and audio-band signal processing. |
| Gain Bandwidth Product | 3.6 MHz | 12 MHz | GBW sets the achievable closed-loop bandwidth and slew performance; a higher value supports faster, wider-bandwidth circuits. |
| Slew Rate | 1.2 V/µs | 2.8 V/µs | Slew rate limits large-signal response speed and full-power bandwidth; higher slew rate enables faster transient handling. |
| Supply Current per Amplifier (Typ) | 0.4 mA | 1.7 mA | Quiescent current affects total power budget, especially in battery-powered or thermally constrained designs. |
| Supply Voltage Range | ±2.5 V to ±15 V (5 V to 30 V) | ±5 V to ±15 V (10 V to 30 V) | The usable supply range determines compatibility with low-voltage rails and overall system power architecture. |
| Input Bias Current (Typ) | 0.5 nA | 40 nA | Lower bias current reduces errors in high-impedance source circuits such as photodiode and precision sensor front-ends. |
| Package | 8-Lead SOIC | 14-Lead SOIC | Package footprint and pin count affect PCB layout, board space, and drop-in compatibility. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4077-2ARZ | ADA4004-4ARZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Series | - | iPolar® |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 2 | 4 |
| Slew Rate | 1.2V/µs | 2.7V/µs |
| Gain Bandwidth Product | 3.6 MHz | 12 MHz |
| Current - Input Bias | 400 pA | 40 nA |
| Voltage - Input Offset | 15 µV | 40 µV |
| Current - Output / Channel | 10 mA | 10 mA |
| Voltage - Supply Span(Min) | 5 V | 10 V |
| Voltage - Supply Span(Max) | 30 V | 30 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| -3 dB Bandwidth | 5.5 MHz | - |
| Supply Current | 400µA (x2 Channels) | - |
The ADA4077-2ARZ is a dual-channel, low-noise, low-offset-voltage operational amplifier in an 8-lead SOIC package, while the ADA4004-4ARZ-RL is a quad-channel, low-noise, low-offset-voltage op amp in a 14-lead SOIC package supplied in tape-and-reel format. The primary differences are channel count (2 vs. 4), package pin count (8 vs. 14), and packaging format (tube/tray vs. reel).
No. The ADA4077-2ARZ uses an 8-lead SOIC package, and the ADA4004-4ARZ-RL uses a 14-lead SOIC package. The different pin counts and pinouts mean they are not drop-in replacements for each other on the same PCB footprint.
Yes. Both the ADA4077-2 and ADA4004-4 are precision, low-noise operational amplifiers from Analog Devices with low offset voltage and low voltage noise density, making them suitable for precision signal-conditioning applications. Designers should still verify the exact datasheet limits for each grade against their requirements.
Not directly. The ADA4077-2ARZ provides only two channels, whereas the ADA4004-4ARZ-RL provides four. A design requiring four independent amplifier channels would need two ADA4077-2ARZ devices or a different quad device, and the PCB layout would have to be redesigned accordingly.
Both the ADA4077-2 and ADA4004-4 are specified for operation on dual supplies typically in the ±2.5 V to ±15 V range (or equivalent single-supply rails), consistent with their datasheet specifications. Always confirm the exact supply limits in the current Analog Devices datasheet before finalizing a design.
The "-RL" suffix indicates tape-and-reel packaging, which is intended for automated pick-and-place assembly in high-volume production. The ADA4077-2ARZ is typically supplied in standard tube or tray packaging, so the packaging format differs between the two parts.
Yes. Both the ADA4077-2 and ADA4004-4 are precision operational amplifiers featuring low offset voltage, low offset drift, and low noise, which are characteristics suited to instrumentation, sensor signal conditioning, and precision filtering. Final suitability depends on the specific grade and the application's accuracy requirements as stated in the datasheets.