ADA4077-2ARZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 5777 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
ADA4077-2ARZ과 ADA4077-1BRZ-RL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADA4077-1BRZ-RL is a functionally compatible replacement candidate for the ADA4077-2ARZ in single-channel applications, sharing the same precision op-amp core, supply range, and SOIC footprint family, though the channel count and package body width differ and must be validated against the target PCB layout.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4077-2ARZ | ADA4077-1BRZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 1 | Determines how many independent op-amp channels are available in a single package; a dual cannot directly replace a single in a circuit requiring two channels without adding a second device. |
| Package / Mounting Type | 8-Lead SOIC (surface mount) | 8-Lead SOIC (surface mount) | Footprint and pinout must match for a drop-in board replacement; both are 8-lead SOIC but the pin assignments differ between single and dual configurations. |
| Grade / Temperature Range | A grade, -40°C to +125°C | B grade, -40°C to +125°C | The B grade offers tighter guaranteed specifications than the A grade, affecting precision performance margins in demanding applications. |
| Input Offset Voltage (max) | 25 µV (A grade) | 15 µV (B grade) | Lower offset voltage improves DC accuracy; the B grade provides tighter offset for precision signal chains. |
| Input Offset Voltage Drift (max) | 0.25 µV/°C (A grade) | 0.1 µV/°C (B grade) | Lower drift maintains accuracy over temperature; the B grade is better suited for wide-temperature precision applications. |
| Input Bias Current (max) | 1.5 nA (A grade) | 1 nA (B grade) | Lower bias current reduces errors in high-impedance circuits; the B grade offers a tighter guaranteed limit. |
| Gain Bandwidth Product | 3.6 MHz | 3.6 MHz | Sets the closed-loop bandwidth achievable; identical GBW means similar AC response for a given gain configuration. |
| Supply Voltage Range | ±2.5 V to ±15 V (4.5 V to 30 V) | ±2.5 V to ±15 V (4.5 V to 30 V) | Defines compatibility with the system power rails; identical range allows use in the same supply environment. |
| Input Voltage Noise Density | 7 nV/√Hz (typ) | 7 nV/√Hz (typ) | Determines noise floor in low-level signal amplification; identical noise performance preserves signal-to-noise ratio. |
| Quiescent Current per Amplifier | 400 µA (typ) | 400 µA (typ) | Affects power budget; identical per-amplifier current means similar total consumption for equivalent channel count. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4077-2ARZ | ADA4077-1BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 2 | 1 |
| Slew Rate | 1.2V/µs | 1.2V/µs |
| Gain Bandwidth Product | 3.6 MHz | 3.6 MHz |
| Current - Input Bias | 400 pA | 400 pA |
| Voltage - Input Offset | 15 µV | 15 µV |
| Supply Current | 400µA (x2 Channels) | 400µA |
| Current - Output / Channel | 10 mA | 22 mA |
| Voltage - Supply Span(Min) | 5 V | 5 V |
| Voltage - Supply Span(Max) | 30 V | 30 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| -3 dB Bandwidth | 5.5 MHz | - |
The ADA4077-2ARZ is a dual-channel precision operational amplifier supplied in an 8-lead SOIC package, while the ADA4077-1BRZ-RL is a single-channel version supplied in an 8-lead SOIC package in tape-and-reel format. Both share the same ADA4077 core amplifier architecture, but differ in channel count, package pinout, and ordering format.
Yes. Both devices are based on the same ADA4077 amplifier core, so per-channel specifications such as low offset voltage, low offset voltage drift, low input bias current, and low noise are consistent between the two. The primary differences are channel count and package configuration, not the per-amplifier electrical performance.
No. The ADA4077-2ARZ is a dual amplifier and the ADA4077-1BRZ-RL is a single amplifier; their pinouts and PCB land patterns differ. A direct drop-in substitution is not possible without redesigning the board layout and verifying the circuit against the manufacturer datasheet.
Both parts are offered in an 8-lead SOIC package. The ADA4077-2ARZ uses the 8-lead SOIC for a dual amplifier, while the ADA4077-1BRZ-RL uses the 8-lead SOIC for a single amplifier in tape-and-reel packaging.
The -RL suffix denotes tape-and-reel packaging, which is intended for automated high-volume assembly. It does not change the electrical specifications of the device; it only defines the shipping and handling format.
The ADA4077-2ARZ should be selected when two matched precision amplifiers are required in a single package, reducing board space and component count. The ADA4077-1BRZ-RL is a single amplifier and would require two devices to achieve the same channel count.
Yes. Both the ADA4077-2ARZ and ADA4077-1BRZ-RL are precision operational amplifiers intended for low-noise, low-offset signal conditioning applications. Designers should confirm the specific gain, bandwidth, and supply requirements against the official manufacturer datasheet for the target circuit.