ADF41513BCPZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 6981 PCS
- Package
- WFQFN-24
- Series
- 클럭 타이밍 - 클럭 발생기, PLL, 주파수 합성기
ADF41513BCPZ과 ADF4159CCPZ-RL7에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADF41513BCPZ is a viable functional replacement candidate for the ADF4159CCPZ-RL7 in fractional-N PLL synthesizer applications, offering a higher maximum RF input frequency and wider operating range, though the designer must validate loop filter design, charge pump current settings, and digital interface timing against the specific system requirements before committing to the substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF4159CCPZ-RL7 | ADF41513BCPZ | Why it matters |
|---|---|---|---|
| Maximum RF Input Frequency | 13 GHz | 13 GHz | Sets the highest frequency the PLL can synthesize; both cover up to 13 GHz, so neither limits high-band operation. |
| Maximum PFD Frequency | 110 MHz | 250 MHz | A higher phase-frequency detector rate allows wider loop bandwidth and faster settling; the ADF41513 supports a significantly higher PFD rate. |
| Normalized Phase Noise (PN floor) | -224 dBc/Hz | -233 dBc/Hz | Lower normalized phase noise yields cleaner synthesized signals; the ADF41513 offers roughly 9 dB better phase-noise performance. |
| Modulus / Fractional Resolution | 25-bit (up to 33.5 million) | 25-bit (up to 33.5 million) | Determines frequency step resolution in fractional mode; both provide fine 25-bit resolution for precise channel spacing. |
| Integrated VCO | No | No | Neither device integrates a VCO, so an external VCO is required in both cases; this affects board design and BOM. |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | Defines the required power rail; both operate from the same 3.3 V nominal supply, simplifying substitution. |
| Package | 32-Lead LFCSP (5x5 mm) | 32-Lead LFCSP (5x5 mm) | Package footprint and pin count affect PCB layout compatibility; both use the same 32-lead LFCSP, aiding drop-in replacement. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Determines environmental suitability; identical industrial temperature ranges mean equivalent ruggedness. |
| Interface | 3-wire SPI | 3-wire SPI | Defines the digital control bus; both use a 3-wire SPI interface, so host firmware architecture is compatible. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF41513BCPZ | ADF4159CCPZ-RL7 |
|---|---|---|
| Part Status | Active | Active |
| Type | Integer-N/Fractional-N | - |
| PLL | Yes | Yes |
| Input | CML, CMOS | CMOS, TTL |
| Output | Clock | CMOS |
| Number of Circuits | 1 | 1 |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 26.5GHz | 13GHz |
| Divider / Multiplier | Yes/Yes | Yes/Yes |
| Voltage - Supply | 3.135V ~ 3.465V | 1.62V ~ 3.45V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADF4159CCPZ-RL7 is a 13 GHz fractional-N frequency synthesizer with integrated waveform generation (ramp/modulation) capability, while the ADF41513BCPZ is a 26.5 GHz fractional-N/integer-N PLL synthesizer without the built-in ramp generation feature. The ADF41513BCPZ offers a higher maximum RF input frequency and wider operating range, whereas the ADF4159CCPZ-RL7 is optimized for frequency-modulated waveform applications such as radar and FMCW systems.
The ADF4159CCPZ-RL7 supports RF input frequencies up to 13 GHz. The ADF41513BCPZ supports RF input frequencies up to 26.5 GHz, making it suitable for higher-frequency applications such as microwave and millimeter-wave systems.
Yes. Both the ADF4159CCPZ-RL7 and the ADF41513BCPZ are fractional-N frequency synthesizers. The ADF41513BCPZ additionally supports integer-N mode, providing flexibility for applications requiring either fractional or integer operation.
The ADF4159CCPZ-RL7 is specifically designed with integrated ramp and modulation generation capability, making it well suited for FMCW radar and frequency-modulated waveform applications. The ADF41513BCPZ does not include this built-in waveform generation feature, so it is more appropriate for general-purpose high-frequency synthesis.
No. The ADF4159CCPZ-RL7 is supplied in a 24-lead LFCSP package, while the ADF41513BCPZ is supplied in a 32-lead LFCSP package. The different package sizes and pin counts mean they are not drop-in replacements for each other, and PCB layouts must be designed accordingly.
Both the ADF4159CCPZ-RL7 and the ADF41513BCPZ operate from a nominal 3.3 V supply, with an allowed analog and digital supply range of approximately 3.0 V to 3.6 V, consistent with Analog Devices PLL synthesizer specifications. Designers should confirm exact limits in the respective datasheets.
Not directly. Although both are fractional-N synthesizers, the ADF41513BCPZ has a different package (32-lead vs 24-lead LFCSP), a higher maximum RF frequency (26.5 GHz vs 13 GHz), and lacks the integrated ramp/modulation generation of the ADF4159CCPZ-RL7. A replacement requires schematic, layout, and firmware changes, and the design must be revalidated against the target application requirements.