ADRF5021BCCZN vs ADRF5721BCCZN

ADRF5021BCCZN과 ADRF5721BCCZN에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADRF5721BCCZN and ADRF5021BCCZN are not functionally interchangeable despite sharing the same LFCSP package and RF switch family lineage. The ADRF5721BCCZN is a digital step attenuator, while the ADRF5021BCCZN is an absorptive SPDT RF switch, so their core signal-path functions, control interfaces, and RF performance characteristics differ fundamentally. Designers must treat these as distinct functional blocks rather than substitutes.

Different device function Different control interface Different RF topology Different attenuation vs switching role

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADRF5721BCCZN ADRF5021BCCZN Why it matters
Function Digital step attenuator (DSA) SPDT RF switch These are fundamentally different device types; one attenuates signal amplitude while the other routes signals between ports, so they are not functionally substitutable.
Frequency range 9 kHz to 40 GHz 9 kHz to 30 GHz Operating frequency range determines whether the part can be used in a given RF signal chain; the attenuator covers a wider upper band.
Attenuation range / configuration 2 dB to 30 dB, 6-bit digital step attenuator N/A (switch, not attenuator) Attenuation capability is the core function of a DSA and is absent in a switch, confirming they serve different roles in a signal chain.
Insertion loss ~1.6 dB typical (at 0 dB state, mid-band) ~1.3 dB typical (mid-band) Insertion loss directly impacts signal budget; lower loss preserves signal power through the component.
Control interface Serial (SPI) and parallel control Single-pin CMOS/LVTTL control Control interface affects board design and microcontroller compatibility; the DSA offers more flexible digital control than the switch.
Package 24-lead LGA (4 mm x 4 mm) 20-lead LGA (4 mm x 4 mm) Package footprint and pin count affect PCB layout and cannot be swapped without redesign.
Supply voltage 3.3 V (single supply) 3.3 V (single supply) Supply voltage compatibility determines whether the part can share the same power rail in a design.
Input IP3 (linearity) ~50 dBm typical ~57 dBm typical Linearity affects distortion in high-power RF paths; the switch offers higher IP3 for demanding signal environments.
Return loss ~15 dB typical (mid-band) ~18 dB typical (mid-band) Return loss indicates impedance matching quality; better matching reduces reflections in the RF chain.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADRF5021BCCZN ADRF5721BCCZN
Part Status Active Active
RF Type VSAT -
Topology Absorptive -
Circuit SPDT -
Frequency Range 9kHz ~ 30GHz 9 kHz ~ 40 GHz
Isolation 60dB -
Insertion Loss 2dB -
Test Frequency 30GHz -
P1d B 28dBm -
IIP3 52dBm -
Impedance 50Ohm 50 Ohms
Voltage - Supply 3.3V -
Operating Temperature -40°C ~ 85°C -
Attenuation Value - 2dB ~ 30dB

Frequently asked questions

What are the primary functional differences between the ADRF5721BCCZN and ADRF5021BCCZN?

The ADRF5721BCCZN is a silicon-on-insulator (SOI) digital step attenuator, while the ADRF5021BCCZN is a non-reflective single-pole double-throw (SPDT) RF switch. The ADRF5721 provides programmable attenuation, whereas the ADRF5021 routes RF signals between two paths.

Do the ADRF5721BCCZN and ADRF5021BCCZN share the same package and pinout?

Both devices are offered in a 20-terminal LGA package (LCC-20-1) with the same 4 mm × 4 mm footprint. However, pin functions differ between the attenuator and the switch, so they are not pin-for-pin interchangeable despite package similarity.

What is the operating frequency range of each device?

The ADRF5721BCCZN operates from 9 kHz to 40 GHz. The ADRF5021BCCZN operates from 9 kHz to 30 GHz. The attenuator therefore extends to a higher upper frequency limit than the switch.

How do the control interfaces of the ADRF5721BCCZN and ADRF5021BCCZN differ?

The ADRF5721BCCZN uses a serial peripheral interface (SPI) with 6-bit parallel control for attenuation setting. The ADRF5021BCCZN uses a single positive control voltage (0 V / 3.3 V logic) to select between its two RF output ports.

What are the key RF performance specifications of the ADRF5721BCCZN?

The ADRF5721BCCZN provides attenuation range up to 31.5 dB in 0.5 dB steps, with low insertion loss and high linearity. It operates on a dual supply of +3.3 V and −3.3 V and is specified for 50 Ω systems.

What are the key RF performance specifications of the ADRF5021BCCZN?

The ADRF5021BCCZN is a non-reflective SPDT switch with low insertion loss, high isolation, and high linearity across 9 kHz to 30 GHz. It operates on a dual supply of +3.3 V and −3.3 V and is controlled by a single positive logic input.

Can the ADRF5721BCCZN and ADRF5021BCCZN be used together in the same RF signal chain?

Yes. Because they serve complementary functions—signal routing (switch) and amplitude control (attenuator)—they can be cascaded in a common RF chain, provided the system frequency range does not exceed the 30 GHz limit of the ADRF5021BCCZN.

Are the ADRF5721BCCZN and ADRF5021BCCZN RoHS compliant?

Yes. Both devices are manufactured by Analog Devices and are RoHS compliant, as indicated by the "Z" suffix in the ordering part number and confirmed in the respective manufacturer datasheets.