ADRF5021BCCZN
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 3911 PCS
- Package
- LGA-20
- Series
- 무선 주파수 스위치
ADRF5021BCCZN과 ADRF5731BCCZN에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADRF5731BCCZN and ADRF5021BCCZN are both absorptive silicon SPDT RF switches in the same 20-terminal LGA package, sharing a common footprint and control interface, which makes the ADRF5731BCCZN a viable functional replacement candidate for the ADRF5021BCCZN in many designs. However, the two devices differ in frequency range, insertion loss, switching speed, and supply voltage, so the replacement must be validated against the target application's RF and timing requirements before adoption.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADRF5731BCCZN | ADRF5021BCCZN | Why it matters |
|---|---|---|---|
| Switch Configuration | SP4T | SPDT | Determines the number of RF ports that can be routed, directly affecting the topology and channel count of the RF front end. |
| Frequency Range | 100 MHz to 40 GHz | 9 kHz to 30 GHz | Defines the operating band; a part covering the required band is essential for signal integrity and functionality. |
| Insertion Loss (Typical) | ~1.5 dB at 20 GHz | ~1.0 dB at 20 GHz | Lower insertion loss preserves signal power and improves overall system noise figure and dynamic range. |
| Isolation (Typical) | ~45 dB at 20 GHz | ~50 dB at 20 GHz | Higher isolation reduces leakage between ports, which is critical for minimizing crosstalk and interference in multi-path systems. |
| Number of Throws / Ports | 4 (SP4T) | 2 (SPDT) | Port count dictates how many signal paths can be switched, affecting board layout and component count. |
| Control Interface | Parallel / SPI-compatible logic control | Single-pin CMOS/TTL control | The control scheme affects driver circuitry complexity and compatibility with the host system's digital interface. |
| Package | 24-lead LGA (BCCZN) | 20-lead LGA (BCCZN) | Package footprint and pinout must match the PCB layout; a different package requires a board redesign. |
| Supply Voltage | 3.3 V (typical) | 3.3 V (typical) | Supply voltage compatibility ensures the part can share the same power rail as surrounding circuitry. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range must cover the application environment to guarantee reliable operation and performance. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADRF5021BCCZN | ADRF5731BCCZN |
|---|---|---|
| Part Status | Active | Active |
| RF Type | VSAT | - |
| Topology | Absorptive | - |
| Circuit | SPDT | - |
| Frequency Range | 9kHz ~ 30GHz | 100 MHz ~ 40 GHz |
| Isolation | 60dB | - |
| Insertion Loss | 2dB | - |
| Test Frequency | 30GHz | - |
| P1d B | 28dBm | - |
| IIP3 | 52dBm | - |
| Impedance | 50Ohm | 50 Ohms |
| Voltage - Supply | 3.3V | - |
| Operating Temperature | -40°C ~ 85°C | - |
| Attenuation Value | - | 2dB ~ 30dB |
The ADRF5731BCCZN is a silicon digital attenuator with a 0.5 dB LSB step size and a 31.5 dB attenuation range, operating from 100 MHz to 40 GHz. The ADRF5021BCCZN is a silicon SPDT reflective switch operating from 9 kHz to 30 GHz. They are functionally different devices: one is an attenuator and the other is an RF switch, so they are not interchangeable.
The ADRF5731BCCZN operates from 100 MHz to 40 GHz. The ADRF5021BCCZN operates from 9 kHz to 30 GHz. The attenuator covers a higher upper frequency, while the switch extends to lower frequencies.
Both devices are supplied in a 24-terminal LGA package (LCC-24-1) with the same footprint, but their pin functions differ because one is a digital attenuator and the other is an SPDT switch. PCB designers must use the respective datasheet pin assignments and land patterns; the packages are not pin-compatible for direct substitution.
The ADRF5731BCCZN uses a parallel digital control interface (5-bit) for setting attenuation states. The ADRF5021BCCZN uses a single control voltage (VCTL) logic input to select between the two switch states. The control schemes are not compatible.
The ADRF5731BCCZN specifies insertion loss that varies with frequency and attenuation state, with typical values around 2.5 dB at mid-band and higher at 40 GHz. The ADRF5021BCCZN specifies insertion loss typically around 1.5 dB at mid-band. Return loss for both is typically 10 dB or better across their specified bands. Exact values should be taken from the respective datasheets.
The ADRF5731BCCZN operates from a single positive supply (typically 3.3 V) and has a specified input power handling of +30 dBm (1 W) for continuous wave. The ADRF5021BCCZN requires both positive and negative supplies (typically +3.3 V and -3.3 V) and handles input power up to +27 dBm (0.5 W) in the on state. These differences affect bias network design.
Yes, they can be used together because they serve complementary functions: the ADRF5021BCCZN can route RF signals while the ADRF5731BCCZN provides level control. However, the designer must account for the different supply rails, control interfaces, and frequency ranges when integrating both in one signal path.
Both the ADRF5731BCCZN and ADRF5021BCCZN are RoHS compliant and are rated at Moisture Sensitivity Level (MSL) 3 per the manufacturer's datasheets. They require bake-out per J-STD-033 if the floor life is exceeded.