ADS1251U/2K5
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 4208 PCS
- Package
- SOIC-8
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1251U/2K5과 ADS1231IDR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1231IDR and ADS1251U/2K5 are both 24-bit delta-sigma ADCs, but they differ fundamentally in resolution architecture, input configuration, interface timing, and package footprint, so the ADS1251U/2K5 cannot be used as a direct drop-in substitute for the ADS1231IDR without redesign of the analog front end, digital interface, and PCB layout.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1231IDR | ADS1251U/2K5 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so resolution alone does not differentiate them for substitutability. |
| Number of input channels | 1 (differential) | 1 (differential) | Both provide a single differential input, so channel count is equivalent for single-sensor designs. |
| Data rate (SPS) | 10 or 80 | Up to 20k | The ADS1251 supports much higher output rates, making it suitable for faster signals while the ADS1231 targets slow, high-resolution measurements. |
| Interface | Serial (SPI-compatible, 2-wire) | Serial (SPI-compatible) | Both use a simple serial interface, but pin/timing details differ, affecting drop-in compatibility. |
| Supply voltage | 2.7 V to 5.3 V | 4.75 V to 5.25 V | The ADS1231 operates over a wider low-voltage range, while the ADS1251 requires a regulated 5 V supply. |
| Internal PGA / gain | Fixed gain 128 | No PGA (fixed gain 1) | The ADS1231 includes a fixed gain stage suited to low-level bridge sensors, whereas the ADS1251 needs external amplification for small signals. |
| Package | SOIC-8 | SOIC-8 | Identical package footprint allows board-level interchangeability if surrounding circuitry is compatible. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings mean both suit the same industrial environments. |
| Typical application focus | Weigh scales, bridge sensors | General-purpose high-speed data acquisition | Different design targets mean substitutability depends on whether low-noise slow sensing or higher-speed conversion is required. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1251U/2K5 | ADS1231IDR |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 20k | 80 |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | ADC | ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 3V ~ 5.3V |
| Voltage - Supply, Digital | 5V | 3V ~ 5.3V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1231IDR is a 24-bit, single-channel delta-sigma ADC optimized for weigh scales and bridge sensors, integrating a low-noise PGA with gains of 1, 2, 64, and 128. The ADS1251U/2K5 is a 24-bit, single-channel delta-sigma ADC with a fixed gain of 1 and a differential input, designed for general-purpose high-resolution measurement without an integrated PGA.
No. The ADS1231IDR is supplied in an 8-pin SOIC (D) package, while the ADS1251U/2K5 is supplied in an 8-pin SOIC (U) package. Although both are 8-pin SOIC outlines, the pin functions and land patterns differ, so they are not drop-in replacements.
The ADS1231IDR provides a fixed 10 SPS or 80 SPS output data rate selectable via the SPEED pin. The ADS1251U/2K5 provides a fixed 20.8 kSPS output data rate.
The ADS1231IDR operates from a single 2.7 V to 5.3 V analog supply (AVDD) and a 2.7 V to 5.3 V digital supply (DVDD). The ADS1251U/2K5 operates from a single 4.75 V to 5.25 V supply (VDD).
The ADS1231IDR is specifically designed for bridge sensor applications because it integrates a low-noise PGA with selectable gains up to 128 and an on-chip oscillator, allowing direct connection to low-level differential bridge outputs. The ADS1251U/2K5 has a fixed gain of 1 and requires external amplification for low-level bridge signals.
The ADS1231IDR includes an internal oscillator and can also be clocked externally via the CLKIN pin. The ADS1251U/2K5 requires an external clock input on the CLK pin; it does not include an internal oscillator.
The ADS1231IDR accepts a differential input within its PGA gain settings, with the absolute input voltage constrained by the analog supply and the PGA configuration. The ADS1251U/2K5 accepts a differential input voltage of ±VREF/2 with a fixed gain of 1, where VREF is the external reference voltage.
No. The ADS1231IDR and ADS1251U/2K5 differ in package pinout, supply requirements, data rate, gain architecture, and clocking scheme. Substitution requires a full schematic and layout review against the respective manufacturer datasheets.