ADS1282HIPWR vs ADS1256IDBT

ADS1282HIPWR과 ADS1256IDBT에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1256IDBT and ADS1282HIPWR are not drop-in replacements for one another. They differ in resolution, input architecture, package footprint, and power supply requirements, so a direct board-level substitution is not feasible without redesign.

Different resolution Different input architecture Different package footprint Different supply requirements

Parts at a glance

Part B

ADS1256IDBT

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4833 PCS
Package
SSOP-28
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1256IDBT ADS1282HIPWR Why it matters
Resolution (bits) 24 31 Higher resolution enables finer signal detail and lower quantization noise, which is critical for precision measurement and seismic/energy-exploration applications.
Maximum Sample Rate (SPS) 30k 4k Sample rate determines the bandwidth of signals that can be captured; the ADS1256 supports much faster throughput for multiplexed multi-channel scanning.
Number of Input Channels 8 (single-ended) / 4 (differential) 2 (differential) Channel count defines how many sensors can be interfaced; the ADS1256 suits multi-sensor systems while the ADS1282 targets single- or dual-channel high-fidelity acquisition.
Input Type Single-ended / Differential (multiplexed) Differential Differential-only inputs offer better common-mode rejection and noise immunity, whereas multiplexed single-ended inputs provide flexibility for many channels.
Interface SPI SPI Both use SPI, so host microcontroller compatibility is similar, though register maps and command sets differ and require firmware changes.
Supply Voltage (Analog) 5 V (single analog supply) 5 V (analog) with separate digital supply Supply requirements affect board-level power design and whether level shifting or separate rails are needed for the digital interface.
PGA / Gain Stages Integrated PGA (gain 1 to 64) Integrated PGA (gain 1 to 64) An integrated PGA allows direct connection of low-level sensors without external amplification, simplifying the analog front end.
Package TSSOP-28 TSSOP-28 Matching package footprints can ease PCB layout reuse, though pinouts and surrounding circuitry still differ between the two devices.
Typical Application Focus Multi-channel industrial measurement, instrumentation, data acquisition Seismic, energy exploration, high-resolution sensor digitization Application focus indicates the intended noise/bandwidth trade-off and helps assess functional substitutability for a given system.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1282HIPWR ADS1256IDBT
Part Status Active Active
Number of Bits 31 24
Sampling Rate (Per Second) 4k -
Number of Inputs 2 4, 8
Input Type Differential Differential, Single Ended
Data Interface SPI SPI
Configuration ADC MUX-PGA-ADC
Number of A / D Converters 1 -
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 1.65V ~ 3.6V 1.8V ~ 3.6V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount -
Base Product Number ADS1282 -
Sampling Rate(Per Second) - 30k
Number of A/D Converters - 1

Frequently asked questions

What are the primary differences between the ADS1256IDBT and ADS1282HIPWR?

The ADS1256IDBT is a 24-bit, 8-channel delta-sigma ADC with a maximum data rate of 30 kSPS, housed in a TSSOP-28 package. The ADS1282HIPWR is a 31-bit, 2-channel delta-sigma ADC designed for seismic and high-resolution measurement applications, offering a maximum data rate of 4 kSPS and housed in a TSSOP-28 package. The ADS1282 provides higher resolution and lower noise for low-frequency signals, while the ADS1256 offers more input channels and a higher sampling rate.

Are the ADS1256IDBT and ADS1282HIPWR pin-compatible?

No. Although both devices are offered in a TSSOP-28 package, their pin functions and internal architectures differ. The ADS1256 integrates an 8-channel input multiplexer and GPIO pins, while the ADS1282 integrates a 2-channel multiplexer with a different digital interface and control pin arrangement. Direct PCB substitution without redesign is not supported.

Which device offers higher resolution and lower noise?

The ADS1282HIPWR provides 31-bit resolution and is specified with very low noise suitable for seismic and precision low-frequency measurement. The ADS1256IDBT provides 24-bit resolution with noise performance optimized for general-purpose multi-channel data acquisition. For applications requiring the lowest noise at low output data rates, the ADS1282 is the higher-performance choice.

What are the maximum data rates of the ADS1256IDBT and ADS1282HIPWR?

The ADS1256IDBT supports programmable data rates up to 30 kSPS. The ADS1282HIPWR supports programmable data rates up to 4 kSPS. The ADS1256 is therefore better suited to applications requiring faster sampling, while the ADS1282 targets high-resolution, low-frequency measurements.

How many input channels does each device support?

The ADS1256IDBT provides an 8-channel input multiplexer that can be configured as 8 single-ended or 4 differential inputs. The ADS1282HIPWR provides a 2-channel input multiplexer. The ADS1256 is preferable when multiple sensor channels must be digitized by a single ADC.

Do both devices support SPI communication?

Yes. Both the ADS1256IDBT and ADS1282HIPWR provide an SPI-compatible serial interface for configuration and data readout. However, the register maps, command sets, and timing specifications differ between the two devices, so firmware must be adapted accordingly.

What are the typical target applications for each device?

The ADS1256IDBT is typically used in multi-channel industrial data acquisition, instrumentation, and process control where 24-bit resolution and up to 30 kSPS are sufficient. The ADS1282HIPWR is intended for high-resolution seismic recording, energy exploration, and precision low-frequency measurement where 31-bit resolution and very low noise are required.

Can the ADS1256IDBT be used as a drop-in replacement for the ADS1282HIPWR?

No. Despite sharing a TSSOP-28 package, the two devices differ in resolution, channel count, data rate, register map, and pin functions. A drop-in replacement is not possible; any substitution requires a full schematic, layout, and firmware review against the respective manufacturer datasheets.