ADS1259IPWR vs ADS1203IPWRG4

ADS1259IPWR과 ADS1203IPWRG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1259IPWR and ADS1203IPWRG4 are not drop-in replacements for one another. The ADS1259IPWR is a 24-bit delta-sigma ADC with an SPI interface and integrated PGA, while the ADS1203IPWRG4 is a 16-bit delta-sigma modulator with a single-bit output stream. They differ in resolution, output interface, package, and functional architecture, so direct substitution is not feasible without redesign.

Different output interface Different resolution Different package Different functional architecture

Parts at a glance

Part A

ADS1259IPWR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
6414 PCS
Package
TSSOP-20
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1259IPWR ADS1203IPWRG4 Why it matters
Resolution (bits) 24 16 Higher resolution enables finer measurement of small signal changes; a 24-bit delta-sigma ADC resolves much smaller steps than a 16-bit device.
Architecture Delta-Sigma (24-bit ADC) Delta-Sigma Modulator The ADS1259 is a complete ADC with digital filter and SPI interface, while the ADS1203 is a modulator-only device requiring external digital filtering, so they are not drop-in substitutes.
Output Interface SPI (serial) 1-bit modulator bitstream The interface determines how the host processor reads data; SPI delivers finished conversion codes, whereas a modulator bitstream needs an external sinc filter.
Input Type Differential (single channel) Differential Differential inputs reject common-mode noise; both are differential, but channel count and configuration differ, affecting system design.
Data Rate / Sample Rate Up to 2.5 kSPS (programmable) Up to 40 kSPS (modulator clock dependent) Sample rate sets the achievable measurement bandwidth and noise trade-off; the modulator runs much faster but requires external decimation.
Supply Voltage 5 V analog, 2.7–5.25 V digital 5 V analog, 3.0–5.5 V digital Supply requirements must match the board's power rails; slight differences in digital supply range can affect compatibility.
Package TSSOP-20 TSSOP-16 Different pin counts and footprints mean the PCB layout must be redesigned; they are not footprint-compatible.
Internal PGA / Gain Yes (programmable gain) No (fixed gain via external front end) An internal PGA allows direct connection of low-level sensors; without it, external amplification is required, changing the analog front-end design.
Typical Application Precision industrial measurement, weigh scales Motor control, current sensing, isolated measurement Intended use cases differ significantly; the ADS1203 targets fast control loops, while the ADS1259 targets high-accuracy DC measurement.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1203IPWRG4
Supplier - Texas Instruments
Part Status Active Obsolete
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) 14k 40k
Data Interface SPI Serial
Voltage Supply Source - Single Supply
Voltage - Supply - 4.75V ~ 5.25V
Operating Temperature -40°C ~ 105°C -40°C ~ 125°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential, Single Ended -
Configuration ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 2.7V ~ 5.25V -
Features PGA -

Frequently asked questions

What are the primary functional differences between the ADS1259IPWR and ADS1203IPWRG4?

The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise programmable gain amplifier and a serial SPI interface, designed for high-resolution, low-frequency measurement applications. The ADS1203IPWRG4 is a 16-bit, 10-MHz clock delta-sigma modulator that outputs a 1-bit data stream for isolated or high-speed signal conditioning, typically paired with an external digital filter or FPGA. In short, the ADS1259 is a complete ADC with digital output, while the ADS1203 is a modulator requiring external digital filtering.

Are the ADS1259IPWR and ADS1203IPWRG4 pin-compatible or package-compatible?

No. The ADS1259IPWR is supplied in a 20-pin TSSOP (PW) package, while the ADS1203IPWRG4 is supplied in a 16-pin TSSOP (PW) package. They differ in pin count and pin functions, so they are not drop-in replacements and require different PCB footprints and layouts.

What are the resolution and output data rate specifications for each device?

The ADS1259IPWR provides 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1203IPWRG4 is a 16-bit delta-sigma modulator that produces a 1-bit output stream at a clock rate up to 10 MHz, with the effective resolution determined by the external digital filter and decimation ratio.

Do both devices support the same digital interface?

No. The ADS1259IPWR uses a SPI-compatible serial interface for reading conversion results and configuring registers. The ADS1203IPWRG4 outputs a single-bit delta-sigma data stream plus a clock signal, and does not provide a register-based SPI interface; it requires an external digital filter or controller to process the bitstream.

What are the typical supply voltage requirements for the ADS1259IPWR and ADS1203IPWRG4?

The ADS1259IPWR operates from an analog supply of 5 V (with a digital supply of 2.7 V to 5.25 V) per the datasheet. The ADS1203IPWRG4 operates from a single 5 V supply for both analog and digital sections. Designers should confirm exact supply ranges and decoupling requirements in the respective manufacturer datasheets.

Which device is better suited for isolated signal acquisition?

The ADS1203IPWRG4 is generally preferred for isolated signal acquisition because its 1-bit delta-sigma output stream can be passed through a single digital isolator, simplifying isolation barrier design. The ADS1259IPWR, with its multi-bit SPI output, would require isolating multiple digital lines, increasing complexity and cost in isolated systems.

Can the ADS1203IPWRG4 be used as a direct substitute for the ADS1259IPWR in an existing design?

No. Beyond package and pin differences, the ADS1203IPWRG4 lacks the integrated digital filter, PGA, and SPI register interface of the ADS1259IPWR. A direct substitution would require adding an external digital filter and redesigning the interface and PCB layout, so it is not a drop-in replacement.