ADS1222IPWR vs ADS1282IPW

ADS1222IPWR과 ADS1282IPW에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1282IPW and ADS1222IPWR are not drop-in replacements for one another. They differ in ADC architecture, resolution, channel configuration, and package footprint, so substituting one for the other requires full electrical and layout redesign rather than a direct swap.

Different ADC architecture Different resolution Different channel configuration Different package footprint

Parts at a glance

Part A

ADS1222IPWR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
3095 PCS
Package
TSSOP-14
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS1282IPW

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4636 PCS
Package
TSSOP-28
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1282IPW ADS1222IPWR Why it matters
Resolution (bits) 31 24 Higher resolution enables finer measurement of small signal changes, which is critical for precision sensor and seismic applications.
Number of input channels 2 (differential) 2 (differential) Channel count determines how many independent signals can be digitized; both offer two differential inputs for flexible sensor interfacing.
Maximum sampling rate 4 kSPS 2 kSPS Sampling rate sets the bandwidth of signals that can be captured; higher rates support faster-changing inputs and wider signal bandwidth.
Interface type SPI SPI The digital interface must match the host microcontroller; both use SPI, simplifying drop-in compatibility at the system level.
Supply voltage (analog) 5 V (analog), 3.3 V (digital) 2.7 V to 5.5 V Supply requirements affect power design and level shifting; the wider single-supply range of the ADS1222 simplifies low-voltage systems.
Input type Differential Differential Differential inputs reject common-mode noise, improving accuracy in electrically noisy environments; both parts support this.
Package TSSOP-28 TSSOP-16 Package footprint and pin count affect PCB layout and board space; the smaller TSSOP-16 of the ADS1222 suits space-constrained designs.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C The temperature range defines the environments where the part is guaranteed to meet specifications; both cover industrial-grade conditions.
PGA / gain stage Integrated PGA (1 to 64) Integrated PGA (1 to 128) An integrated programmable gain amplifier allows direct connection of low-level sensors without external front-end circuitry; gain range affects small-signal sensitivity.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1222IPWR ADS1282IPW
Part Status Active Active
Number of Bits 24 31
Sampling Rate(Per Second) 240 4k
Number of Inputs 2 1
Input Type Differential, Single Ended Differential
Data Interface SPI SPI
Configuration MUX-ADC ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 5.5V 5V
Voltage - Supply, Digital 2.7V ~ 5.5V 1.65V ~ 3.6V
Features Temperature Sensor PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary functional differences between the ADS1282IPW and ADS1222IPWR?

The ADS1282IPW is a high-resolution, 32-bit delta-sigma ADC designed for seismic and energy exploration applications, featuring a programmable gain amplifier (PGA) and offering data rates up to 4 kSPS. The ADS1222IPWR is a 24-bit delta-sigma ADC with a built-in PGA, designed for low-power sensor measurement applications, supporting data rates up to 2 kSPS. The ADS1282 provides higher resolution (32-bit vs. 24-bit) and is optimized for high dynamic range signal acquisition, while the ADS1222 is optimized for low-power, general-purpose sensor digitization.

Are the ADS1282IPW and ADS1222IPWR pin-compatible?

No. The ADS1282IPW is offered in a 28-pin TSSOP package, while the ADS1222IPWR is offered in a 20-pin TSSOP package. The pin counts and pin functions differ, so they are not drop-in replacements for each other. PCB layout and footprint changes would be required to substitute one for the other.

What are the supply voltage requirements for each device?

The ADS1282IPW operates with an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 3.3 V (with a range of 2.7 V to 3.6 V per the datasheet). The ADS1222IPWR operates with a single supply voltage ranging from 2.7 V to 5.5 V. Designers must verify the exact supply rail requirements against the respective manufacturer datasheets before substitution.

Which device offers higher resolution and dynamic range?

The ADS1282IPW offers higher resolution at 32 bits compared to the ADS1222IPWR's 24 bits. The ADS1282 is specifically designed for high-resolution seismic and energy exploration applications requiring very high dynamic range, while the ADS1222 targets lower-power, lower-resolution sensor measurement applications. The ADS1282's higher bit resolution and PGA architecture support superior dynamic range performance for precision signal acquisition.

What are the typical power consumption characteristics of these two ADCs?

The ADS1282IPW typically consumes approximately 12 mW in normal operation mode, reflecting its high-performance design for demanding precision applications. The ADS1222IPWR is designed for low-power operation, typically consuming significantly less power, making it suitable for portable and battery-powered sensor systems. Exact power consumption figures should be confirmed from the respective manufacturer datasheets under specified operating conditions.

What are the target applications for the ADS1282IPW versus the ADS1222IPWR?

The ADS1282IPW is targeted at high-resolution seismic data acquisition, energy exploration, and precision industrial measurement applications requiring 32-bit resolution and high dynamic range. The ADS1222IPWR is targeted at low-power sensor measurement applications such as portable instrumentation, temperature and pressure sensing, and general-purpose data acquisition where 24-bit resolution and low power consumption are priorities. The application profiles differ significantly, so selection should be based on resolution, power, and signal chain requirements.

Can the ADS1222IPWR be used as a substitute for the ADS1282IPW in an existing design?

No, not without significant redesign. The two devices differ in package pin count (28-pin vs. 20-pin TSSOP), resolution (32-bit vs. 24-bit), supply requirements, and target application performance. A direct substitution is not possible; the designer must validate all electrical, timing, and layout differences against the manufacturer datasheets and confirm that the ADS1222IPWR meets the system's resolution, dynamic range, and power budget requirements before considering a replacement.