ADS7844N
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 1495 PCS
- Package
- SSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7844N과 ADS7841ES/2K5G4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7841ES/2K5G4 is a functional replacement candidate for the ADS7844N in many 12-bit SAR ADC applications, but it is not a drop-in substitute: the ADS7844N provides four input channels in a 20-pin SSOP package, while the ADS7841ES/2K5G4 offers a single input channel in a 16-pin SOIC package. Designers must verify channel count, package footprint, and control-interface timing against the target board before committing to the substitution.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7841ES/2K5G4 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Determines how many analog signals can be measured; the ADS7844N supports twice as many channels, so it is not a drop-in replacement where 8 channels are required. |
| Resolution | 12 bit | 12 bit | Both provide 12-bit resolution, so measurement precision is equivalent and substitutable in this respect. |
| Sampling Rate | 200 kSPS | 200 kSPS | Identical throughput means timing and acquisition budgets remain compatible between the two parts. |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Same supply range allows operation from the same rails, simplifying power design and substitution. |
| Interface | SPI / QSPI / Microwire compatible serial | SPI / QSPI / Microwire compatible serial | Identical serial interface protocol means the same microcontroller firmware and bus wiring can be reused. |
| Package | 20-pin SSOP (DBQ) | 16-pin SSOP (DBQ) | Different pin counts and footprints mean the PCB layout must change; the parts are not physically interchangeable. |
| Pin Count | 20 | 16 | Pin count affects footprint and routing; a 20-pin device cannot be placed in a 16-pin socket. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Same industrial temperature range ensures equivalent environmental robustness for both parts. |
| Power Consumption (typical) | ~0.9 mW at 5 V, 200 kSPS | ~0.9 mW at 5 V, 200 kSPS | Comparable power draw means thermal and battery-life budgets are unaffected by substitution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7841ES/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841ES/2K5G4 is a 4-channel, 12-bit SAR ADC in a 16-pin QSOP package, supplied in tape-and-reel form. The primary differences are channel count (8 vs. 4), package type (PDIP vs. QSOP), and packaging format (tube vs. tape-and-reel).
No. The ADS7844N uses a 20-pin PDIP package, while the ADS7841ES/2K5G4 uses a 16-pin QSOP package. The pin counts and package footprints differ, so they are not pin-compatible and cannot be interchanged on the same PCB land pattern without redesign.
Yes. Both are 12-bit successive-approximation ADCs with a serial SPI-compatible interface, operating from a single 2.7 V to 5.25 V supply. Both support single-ended and differential input configurations, though the ADS7844N provides 8 channels versus 4 channels on the ADS7841ES/2K5G4.
Not directly. The ADS7841ES/2K5G4 has only 4 input channels versus 8 on the ADS7844N, and its 16-pin QSOP footprint differs from the 20-pin PDIP of the ADS7844N. A replacement requires verifying channel count requirements, redesigning the PCB land pattern, and validating the serial timing against the target design.
The ADS7844N is supplied in a 20-pin PDIP (N) package, typically in tube form for through-hole assembly. The ADS7841ES/2K5G4 is supplied in a 16-pin QSOP (DBQ) package in tape-and-reel format (2K5 suffix indicates 2,500 units per reel), suited to automated surface-mount assembly.
Yes. Both the ADS7844N and ADS7841ES/2K5G4 operate from a single supply of 2.7 V to 5.25 V, per their respective manufacturer datasheets. This allows both to interface with common 3 V and 5 V logic systems, subject to timing and reference configuration validation.
The ADS7844N is better suited for higher channel-count applications because it provides 8 input channels, compared to 4 channels on the ADS7841ES/2K5G4. For designs requiring more than 4 single-ended inputs, the ADS7844N reduces the need for external multiplexing, provided the 20-pin PDIP package fits the assembly process.