ADS7844N
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 1495 PCS
- Package
- SSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7844N과 ADS7842E/1KG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7844N and ADS7842E/1KG4 are not drop-in replacements for one another. The ADS7844N is an 8-channel, 12-bit SAR ADC in a 20-pin PDIP package with a serial interface, while the ADS7842E/1KG4 is a 4-channel, 12-bit SAR ADC in a 20-pin SSOP package with a parallel interface. The differences in channel count, package footprint, and digital interface architecture require board redesign and firmware changes, making direct substitution impractical without validation.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7842E/1KG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 12 | 12 | Both are 12-bit ADCs, so resolution is equivalent and not a differentiator for substitutability. |
| Number of input channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many signals can be multiplexed into one ADC; the ADS7844N supports twice as many inputs. |
| Sampling rate (max) | 200 kSPS | 200 kSPS | Throughput is identical, so timing-critical designs can generally swap without resampling budget changes. |
| Interface | SPI / serial (4-wire) | Parallel (byte-wide) | The digital interface differs fundamentally; SPI versus parallel affects pin count, host wiring, and firmware, so they are not drop-in substitutes. |
| Supply voltage | 2.7 V to 5.25 V | 5 V (single supply) | The wider supply range of the ADS7844N allows 3.3 V operation, while the ADS7842E requires a 5 V rail. |
| Package | 20-pin SSOP | 28-pin SSOP | Different package footprints and pin counts prevent direct board-level replacement without layout changes. |
| Reference input | External reference | External reference | Both require an external reference, so reference design considerations are similar for either part. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature ratings mean environmental suitability is the same for both devices. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7842E/1KG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Features | - | Selectable Address |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation register (SAR) analog-to-digital converter (ADC) with a serial SPI/QSPI/Microwire interface, housed in a 20-pin SSOP package. The ADS7842E/1KG4 is a 4-channel, 12-bit SAR ADC with a parallel interface, supplied in a 28-pin SSOP package. The ADS7844N provides twice the input channel count and a serial interface, while the ADS7842E/1KG4 offers a parallel data bus for faster host-side readback.
No. The ADS7844N is packaged in a 20-pin SSOP, whereas the ADS7842E/1KG4 is packaged in a 28-pin SSOP. The differing pin counts and pin functions preclude direct PCB footprint compatibility, so a board redesign or adapter is required to interchange these devices.
The ADS7844N provides 8 single-ended inputs or 4 differential input pairs, selectable via its input multiplexer. The ADS7842E/1KG4 provides 4 single-ended inputs or 2 differential input pairs. Designs requiring more than four single-ended channels must use the ADS7844N or add an external multiplexer ahead of the ADS7842E/1KG4.
Both devices operate from a single 2.7 V to 5.25 V analog supply and support an external reference voltage that sets the full-scale input range. The reference input range and analog supply must be verified against the respective manufacturer datasheets for the specific operating conditions of the target design.
The ADS7844N uses a serial interface compatible with SPI, QSPI, and Microwire, reducing pin count and simplifying isolation. The ADS7842E/1KG4 uses a parallel interface with a full data bus, which allows higher throughput to the host controller but requires more I/O pins and board routing.
No. Differences in package pin count, interface type (serial versus parallel), and channel count mean the two devices are not drop-in replacements. Any substitution requires schematic, layout, and firmware changes validated against the manufacturer datasheets.
Both are 12-bit successive-approximation register (SAR) ADCs. They share the same resolution and conversion principle, so selection between them should be based on channel count, interface type, and package rather than resolution.