Part A
AFE58JD32ZBV
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 9893 PCS
- Series
- 데이터 수집 - 아날로그 프런트엔드(AFE)
Replacement verdict
Not a drop-in replacement
The AFE5805ZCF and AFE58JD32ZBV are not drop-in replacements for one another. They differ in channel count, package footprint, and digital interface architecture, and the AFE58JD32ZBV integrates additional digital processing and JESD204B serial output that the AFE5805ZCF does not provide. A direct board-level substitution is not feasible without redesign of the analog front-end layout, clocking, and digital back-end interface.
Different channel count
Different package footprint
Different output interface
Different power architecture
Parts at a glance
Part B
AFE5805ZCF
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2189 PCS
- Package
- NFBGA-135
- Series
- 데이터 수집 - 아날로그 프런트엔드(AFE)
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE5805ZCF | AFE58JD32ZBV | Why it matters |
|---|---|---|---|
| Number of Channels | 8 | 32 | Channel count determines how many transducer elements can be processed simultaneously, directly affecting imaging system architecture and scalability. |
| Analog-to-Digital Converter Resolution | 12 bit | 12 bit | ADC resolution affects dynamic range and image quality; both share 12-bit resolution so digitization precision is comparable. |
| Maximum Sampling Rate | 50 MSPS | 65 MSPS | Higher sampling rate supports higher-frequency transducers and better time resolution, influencing achievable imaging bandwidth. |
| Low-Noise Amplifier (LNA) Gain Range | 10 dB to 30 dB | 10 dB to 30 dB | LNA gain range sets the input signal handling and noise trade-off; matching ranges indicate similar front-end sensitivity behavior. |
| Time-Gain Compensation (TGC) Range | Up to 40 dB | Up to 40 dB | TGC compensates for depth-dependent attenuation; comparable range means similar ability to equalize echoes across imaging depth. |
| Continuous Wave (CW) Doppler Support | Yes | Yes | CW Doppler capability is required for blood-flow velocity measurement; both supporting it preserves Doppler functionality. |
| Digital Interface | LVDS | LVDS | The output interface determines board-level connectivity and data-rate compatibility with downstream FPGAs or processors. |
| Supply Voltage | 3.3 V (analog), 1.8 V (digital) | 3.3 V (analog), 1.8 V (digital) | Supply rail requirements affect power design and regulator selection; matching rails simplify board redesign and substitution. |
| Package Type | NFBGA (ZCF) | NFBGA (ZBV) | Package footprint and pinout determine PCB layout compatibility; differing packages require board redesign for substitution. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AFE58JD32ZBV | AFE5805ZCF |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 12 | 12 |
| Number of Channels | 32 | 8 |
| Voltage - Supply, Analog | 3V ~ 3.3V | 3.15V ~ 3.47V, 5V |
| Voltage - Supply, Digital | 3V ~ 3.3V | 1.7V ~ 1.9V |
| Mounting Type | Surface Mount | Surface Mount |
| Base Product Number | AFE58JD32 | - |
| Power (Watts) | 42 mW | 122 mW |
Frequently asked questions
What are the primary differences between the AFE5805ZCF and AFE58JD32ZBV?
The AFE5805ZCF is an 8-channel analog front-end (AFE) for ultrasound with a 12-bit ADC and LVDS outputs, housed in a 100-pin NFBGA (ZCF) package. The AFE58JD32ZBV is a 32-channel AFE with a 12-bit ADC, integrated digital demodulation, and JESD204B serial output, housed in a 289-pin NFBGA (ZBV) package. The AFE58JD32ZBV offers higher channel density and a JESD204B interface, while the AFE5805ZCF uses LVDS output and provides 8 channels.
Are the AFE5805ZCF and AFE58JD32ZBV pin-to-pin or package compatible?
No. The AFE5805ZCF uses a 100-pin NFBGA (ZCF) package, while the AFE58JD32ZBV uses a 289-pin NFBGA (ZBV) package. The pin counts, package dimensions, and pin functions differ, so they are not drop-in replacements and require different PCB footprints.
How do the channel counts of the AFE5805ZCF and AFE58JD32ZBV compare?
The AFE5805ZCF integrates 8 channels per device, whereas the AFE58JD32ZBV integrates 32 channels per device. The higher channel count of the AFE58JD32ZBV supports denser ultrasound system architectures with fewer components per system.
What output interface does each device use?
The AFE5805ZCF provides LVDS serial output for ADC data. The AFE58JD32ZBV provides a JESD204B serial output interface. The JESD204B interface on the AFE58JD32ZBV reduces the number of high-speed data lanes required compared with LVDS, which is advantageous for high-channel-count systems.
Do both devices include digital demodulation or CW Doppler processing?
The AFE58JD32ZBV includes integrated digital demodulation and continuous-wave (CW) Doppler processing per manufacturer documentation. The AFE5805ZCF does not include integrated digital demodulation; it is an analog front-end with ADC and LVDS output. Designers requiring on-chip demodulation should select the AFE58JD32ZBV.
What are the typical target applications for each device?
The AFE5805ZCF is typically used in mid-range ultrasound systems requiring 8 channels per device with LVDS output. The AFE58JD32ZBV is typically used in high-channel-count ultrasound systems, including portable and cart-based systems, where JESD204B output and integrated demodulation reduce FPGA I/O and processing load.
Can the AFE58JD32ZBV directly replace the AFE5805ZCF in an existing design?
No. Direct replacement is not possible because the devices differ in package (100-pin ZCF vs 289-pin ZBV), channel count (8 vs 32), and output interface (LVDS vs JESD204B). A redesign of the PCB footprint, clocking, and FPGA interface is required when migrating from the AFE5805ZCF to the AFE58JD32ZBV.