AM26C31IDR vs AM26C31CDRE4

AM26C31IDR과 AM26C31CDRE4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26C31IDR and AM26C31CDRE4 are functionally equivalent quad differential line drivers from the same AM26C31 family, sharing identical logic function, channel count, supply voltage range, and SOIC-16 package footprint. The primary distinction lies in operating temperature range and qualification grade, so the AM26C31CDRE4 can serve as a functional substitute for the AM26C31IDR provided the target application's thermal and qualification requirements are validated against the CDR grade specifications.

Logic Function and Output Type High match
Package Type and Pinout High match
Supply Voltage Range High match
Operating Temperature Range Validation required

Parts at a glance

Part A

AM26C31IDR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
2239 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버
Part B

AM26C31CDRE4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
7084 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26C31IDR AM26C31CDRE4 Why it matters
Function Quadruple differential line driver Quadruple differential line driver Both devices perform the same core function, so they are functionally interchangeable in RS-422/RS-485 driver applications.
Number of Drivers 4 4 The driver count determines how many differential lines can be driven per package, affecting channel density in a design.
Supply Voltage (Typical) 5 V 5 V Both operate from a 5 V supply, so the same power rail can be used without redesign.
Output Type Differential (3-state) Differential (3-state) Three-state differential outputs allow bus sharing and are essential for multipoint bus topologies.
Package / Mounting 16-SOIC, surface mount 16-SOIC, surface mount Identical package and mounting allow drop-in board replacement without layout changes.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C Matching temperature ranges ensure both parts suit the same industrial and commercial environments.
Data Rate Up to 10 Mbps Up to 10 Mbps The maximum signaling rate must meet the application's bandwidth requirement for reliable data transmission.
RoHS Compliance RoHS compliant RoHS compliant RoHS status affects regulatory compliance and is required for many commercial and consumer designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26C31IDR AM26C31CDRE4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Driver
Number of Drivers/Receivers 4/0 4/0
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AM26C31IDR and AM26C31CDRE4?

Both are quadruple differential line drivers from Texas Instruments that meet the TIA/EIA-422-B and ITU-T V.11 specifications. They are functionally identical RS-422 line driver ICs; the difference lies in the temperature grade and ordering suffix.

What is the difference between the AM26C31IDR and AM26C31CDRE4?

The AM26C31IDR is the industrial temperature grade version (suffix "I"), specified for operation from -40°C to +85°C, supplied in a 16-pin SOIC package on tape and reel. The AM26C31CDRE4 is the commercial temperature grade version (suffix "C"), specified for 0°C to +70°C, also in a 16-pin SOIC package on tape and reel (the "E4" suffix denotes Pb-free/RoHS-compliant green molding compound).

Are the AM26C31IDR and AM26C31CDRE4 pin-compatible?

Yes. Both devices are offered in the same 16-pin SOIC (D) package with identical pin assignments, so they are pin-compatible and share the same PCB land pattern.

Can the AM26C31CDRE4 be used as a drop-in replacement for the AM26C31IDR?

Electrically and functionally they are interchangeable, but the AM26C31CDRE4 is only rated for 0°C to +70°C. It should only replace the AM26C31IDR in applications whose operating temperature range stays within the commercial limits; for -40°C to +85°C environments the industrial-grade AM26C31IDR must be used.

What are the key electrical specifications common to both devices?

Both are 5 V RS-422 line drivers with four differential outputs, typical output skew and low quiescent current, and they support data rates up to 10 Mbps. They feature a common enable function and are designed for balanced transmission lines per TIA/EIA-422-B.

Do both parts meet the same industry standards?

Yes. Both the AM26C31IDR and AM26C31CDRE4 meet or exceed the requirements of TIA/EIA-422-B and ITU-T Recommendation V.11, and both are offered in Pb-free, RoHS-compliant packaging.

Which part should be selected for an industrial-temperature design?

The AM26C31IDR should be selected, because its -40°C to +85°C operating range covers industrial environments, whereas the AM26C31CDRE4 is limited to 0°C to +70°C.