AM26C31IDR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2239 PCS
- Package
- SOIC-16
- Series
- 인터페이스 - 드라이브, 수신기, 트랜시버
AM26C31IDR과 AM26C31IDG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AM26C31IDR and AM26C31IDG4 are functionally equivalent quad differential line drivers from the same manufacturer, sharing identical electrical specifications, logic function, and package footprint. The only distinction is the ordering suffix denoting packaging format (tape-and-reel versus tube/rail), making them interchangeable for design and production purposes provided the assembly process accommodates the respective packaging.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26C31IDR | AM26C31IDG4 | Why it matters |
|---|---|---|---|
| Function | Quadruple differential line driver | Quadruple differential line driver | Both parts perform the same core function, so they are functionally interchangeable in the circuit. |
| Number of Drivers | 4 | 4 | The driver count must match the number of differential lines the design needs to drive. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | The operating supply range determines compatibility with the system power rail. |
| Output Type | Differential (3-state) | Differential (3-state) | Three-state differential outputs allow bus sharing and match the signaling standard required by the interface. |
| Data Rate | Up to 10 Mbps | Up to 10 Mbps | The maximum data rate must meet or exceed the signaling speed of the application. |
| Package / Mounting | SOIC-16, surface mount | SOIC-16, surface mount | Package and mounting style must match the PCB footprint and assembly process. |
| Operating Temperature Range | -40 °C to 85 °C | -40 °C to 85 °C | The temperature range must cover the environmental conditions of the target application. |
| RoHS Compliance | RoHS compliant | RoHS compliant | Compliance affects regulatory acceptance and environmental requirements for the finished product. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26C31IDR | AM26C31IDG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Driver | Driver |
| Number of Drivers/Receivers | 4/0 | 4/0 |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Both devices are functionally identical quad differential line drivers from Texas Instruments. The AM26C31IDR is supplied in a 16-pin SOIC package on a standard 330 mm reel, while the AM26C31IDG4 is the same die and package supplied in a Green (RoHS-compliant, Pb-free) qualified version. The "G4" suffix denotes TI's Green material set; electrical performance and pinout are unchanged.
Yes. Both parts share the same datasheet parameters: quad 3-state differential line drivers, 5 V nominal supply, TIA/EIA-422-B and ITU-T V.11 compatible outputs, and identical propagation delays and output drive. They differ only in the ordering suffix and material/qualification designation, so they are drop-in replacements for one another.
Both are offered in a 16-pin SOIC (D) package with the same pin assignment: four driver inputs (1A–4A), four driver outputs (1Y–4Y), two enable inputs (1,2EN and 3,4EN), VCC, and GND. The pinout is identical between the IDR and IDG4 variants.
Both operate from a single 5 V supply (4.5 V to 5.5 V range) and provide differential outputs compliant with TIA/EIA-422-B and ITU-T V.11. They are intended for balanced differential data transmission over twisted-pair or parallel-wire cables.
The AM26C31IDG4 carries TI's "G4" Green designation, indicating RoHS-compliant, Pb-free construction. The AM26C31IDR is the standard ordering code; its RoHS status should be confirmed against the specific manufacturer datasheet or distributor listing, as TI has transitioned many standard suffixes to Green material over time. Designers requiring documented Pb-free status should specify the G4 variant.
Yes. Because both use the identical 16-pin SOIC (D) package with the same pinout and land pattern, no PCB redesign is required when substituting one for the other. Only the ordering code and material qualification differ.
Both are used as balanced differential line drivers in RS-422/RS-485-style transmission systems, industrial control networks, motor control interfaces, and point-to-point data links. Their 3-state outputs allow multiple drivers to share a bus, and their TIA/EIA-422-B compliance supports reliable long-distance differential signaling.