AMC1311DWV
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 6795 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 전용
AMC1311DWV과 AMC1306M25DWVR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AMC1306M25DWVR and AMC1311DWV are not drop-in replacements for each other. The AMC1306M25DWVR is a ±250 mV input, isolated delta-sigma modulator with a 1-bit Manchester-coded bitstream output, while the AMC1311DWV is a ±1 V input, isolated amplifier with a differential analog output. Their input voltage ranges, output signal types, and functional architectures differ fundamentally, so they serve different signal-chain roles and cannot be interchanged without redesigning the surrounding circuitry.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1306M25DWVR | AMC1311DWV | Why it matters |
|---|---|---|---|
| Input Signal Type | Current shunt (differential voltage input, ±250 mV) | Voltage (high-impedance, ±1 V input) | Determines what physical quantity the device measures; a current-sense modulator cannot directly replace a voltage-sense amplifier without redesigning the sensing front end. |
| Output Interface | 1-bit delta-sigma modulator (bitstream) | Analog differential output | The downstream signal chain differs fundamentally: the modulator requires a digital filter/decimator, while the amplifier feeds an ADC or analog control loop. |
| Input Voltage Range | ±250 mV (linear input range) | ±1 V (linear input range) | Defines the maximum sense signal before clipping; mismatched ranges require different shunt or divider scaling. |
| Gain | Fixed gain of 8 (modulator output density) | Fixed gain of 1 (unity) | Affects overall system scaling and resolution allocation; gain differences change the effective full-scale mapping. |
| Isolation Rating | Reinforced isolation, 5 kV RMS (per datasheet) | Reinforced isolation, 5 kV RMS (per datasheet) | Both provide comparable safety isolation, so isolation is not a differentiator for substitutability. |
| Supply Voltage | 3.3 V (high side) / 3.3 V or 5 V (low side) | 3.3 V (high side) / 3.3 V or 5 V (low side) | Power rail compatibility is similar, easing board-level integration for either device. |
| Package | 8-pin SOIC (DW) | 8-pin SOIC (DWV) | Footprint and pinout compatibility affect whether a drop-in replacement is physically possible. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Identical temperature ratings mean environmental constraints do not differentiate the two parts. |
| Typical Application | Motor drive current sensing, shunt-based current measurement | Isolated voltage sensing (e.g., DC-link, inverter output voltage) | The intended measurement function differs, so they are not functionally substitutable despite similar isolation and package. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1311DWV | AMC1306M25DWVR |
|---|---|---|
| Part Status | Active | Active |
| Type | Isolation | Isolated Module |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | - | 78k |
| Data Interface | - | CMOS, Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 2.7V ~ 5.5V |
| Operating Temperature | - | -40°C ~ 125°C |
The AMC1306M25DWVR is a precision isolated delta-sigma modulator with a ±250 mV input range, designed for direct shunt-resistor current sensing. The AMC1311DWV is an isolated amplifier with a ±1 V input range and a fixed gain of 1, intended for isolated voltage sensing. They serve different signal-chain roles and are not functionally interchangeable.
Both devices are offered in a 16-pin SOIC (DWV) package, but their pin functions and output interfaces differ. The AMC1306M25DWVR provides a single-bit delta-sigma bitstream output, while the AMC1311DWV provides a differential analog output. PCB layouts and downstream circuitry must be designed accordingly.
The AMC1306M25DWVR has a specified input range of ±250 mV, optimized for low-level shunt voltage drops. The AMC1311DWV has a specified input range of ±1 V, suited for higher-level voltage sensing through a resistor divider. Applying signals outside these ranges will not produce valid linear outputs.
The AMC1306M25DWVR outputs a Manchester-encoded or unencoded single-bit delta-sigma bitstream that requires a digital filter (e.g., sinc filter) on the controller side to reconstruct the sample. The AMC1311DWV outputs a differential analog voltage with a fixed gain of 1, which can be fed directly to an ADC or analog control loop.
Both devices are reinforced isolated components rated for 5 kV RMS isolation (per UL 1577) and are specified for a maximum working isolation voltage of 1.5 kV peak per VDE V 0884-11. Designers should confirm the exact certification and working-voltage ratings in the respective manufacturer datasheets for the target application.
No. The two parts differ in input range, output format, and signal-chain requirements. The AMC1306M25DWVR requires a digital filter and a modulator clock, whereas the AMC1311DWV provides an analog output. A direct drop-in replacement is not possible without redesigning the sensing front end and the receiving circuitry.
The AMC1306M25DWVR is intended for shunt-based current sensing because its ±250 mV input range matches typical shunt voltage drops and its bitstream output suits isolated current-loop control. The AMC1311DWV is intended for isolated voltage sensing, such as DC-link or phase-voltage measurement, because its ±1 V input range accommodates divided voltage signals and its analog output interfaces directly with ADCs.
Both devices use a dual-supply arrangement with a high-side supply (AVDD) and a low-side supply (DVDD). The AMC1306M25DWVR operates with a 5 V high-side supply and a 3.3 V or 5 V low-side supply, while the AMC1311DWV operates with a 5 V high-side supply and a 3.3 V or 5 V low-side supply. Exact recommended operating conditions should be verified in the respective datasheets.