AD5252BRUZ1-RL7
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 6830 PCS
- Package
- TSSOP-14
- Series
- 데이터 수집 - 디지털 전위기
AD5252BRUZ1-RL7과 AD5251BRU1에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD5251BRU1 and AD5252BRUZ1-RL7 share the same dual-channel digital potentiometer architecture, 10 kΩ end-to-end resistance, I²C interface, and TSSOP-14 footprint, making the AD5251BRU1 a viable functional substitute for the AD5252BRUZ1-RL7 in most designs. However, the AD5251 offers 64-position resolution versus 256 positions on the AD5252, and the AD5252 provides nonvolatile EEMEM storage for wiper settings that the AD5251 lacks. Designers must validate resolution-sensitive applications and any reliance on nonvolatile wiper recall before committing to this substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1-RL7 | AD5251BRU1 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the resolution of the digital potentiometer; a 256-position device offers finer adjustment steps than a 64-position device, affecting precision in calibration and control loops. |
| Number of Taps | 256 | 64 | The number of taps defines the discrete resistance settings available, directly impacting the achievable wiper resolution and monotonicity of the potentiometer. |
| Resistance Value | 1 kΩ | 10 kΩ | The end-to-end resistance affects the current handling, power dissipation, and the RC time constants in the circuit; substituting a different value can alter signal levels and timing. |
| Interface Type | I²C | Up/Down (3-wire) | The communication protocol determines how the host controller configures the device; I²C and up/down interfaces are not pin-compatible and require different firmware and wiring. |
| Memory Type | Non-Volatile (EEPROM) | Volatile | Non-volatile memory retains the wiper setting after power loss, while volatile memory resets to a default position, affecting system startup behavior and the need for re-initialization. |
| Package / Mounting | 14-TSSOP (Surface Mount) | 14-TSSOP (Surface Mount) | Package and mounting type must match the PCB footprint and assembly process; both being 14-TSSOP allows potential board-level compatibility if pinouts align. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | The operating voltage range must be compatible with the system power rails; identical ranges simplify power supply design and ensure similar logic-level compatibility. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | The temperature range defines the environments in which the device can reliably operate; a wider range supports harsher industrial or automotive applications. |
| Wiper Resistance | ~50 Ω (typical) | ~50 Ω (typical) | Wiper resistance adds to the set resistance and can cause errors, especially at low resistance settings; similar values ensure comparable accuracy in voltage divider or rheostat modes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1-RL7 | AD5251BRU1 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 2 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 1k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±30% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1-RL7 is a dual-channel, 256-position digital potentiometer, while the AD5251BRU1 is a single-channel, 64-position digital potentiometer. The AD5252 offers two independent variable resistors, whereas the AD5251 provides only one. Additionally, the AD5252 has 8 bits of resolution (256 positions), and the AD5251 has 6 bits (64 positions). Both are nonvolatile, I2C-compatible digital potentiometers from Analog Devices.
No. The AD5252BRUZ1-RL7 is supplied in a 14-lead TSSOP package, while the AD5251BRU1 is supplied in a 10-lead MSOP package. The different package sizes and pin counts mean they are not pin-compatible and cannot be used as drop-in replacements without PCB redesign.
The AD5252BRUZ1-RL7 is available in 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ end-to-end resistance options. The AD5251BRU1 is available in 10 kΩ, 50 kΩ, and 100 kΩ options. The specific resistance value is indicated by the part number suffix and must be confirmed from the ordering guide in the respective datasheets.
Yes. Both the AD5252 and AD5251 are nonvolatile digital potentiometers that retain the wiper setting after power is removed. They store the wiper position in on-chip EEPROM, which is restored automatically at power-up. This is a key feature of both devices.
Both devices support a 2-wire I2C-compatible serial interface. The AD5252 supports standard mode (100 kHz) and fast mode (400 kHz). The AD5251 also supports standard and fast mode I2C. Both can be addressed via hardware pins, allowing multiple devices on the same bus.
No. The AD5251BRU1 is a single-channel, 64-position device in a 10-lead MSOP package, while the AD5252BRUZ1-RL7 is a dual-channel, 256-position device in a 14-lead TSSOP package. They differ in channel count, resolution, package, and pinout. A direct substitution is not possible without significant hardware and software changes.
Both devices are used for digital volume control, LCD panel brightness and contrast adjustment, programmable power supplies, gain and offset adjustment in signal conditioning, and mechanical potentiometer replacement. The AD5252 is preferred where two independent channels are needed, while the AD5251 suits space-constrained single-channel applications.
Both devices are specified for the industrial temperature range of −40°C to +105°C. This is a standard specification for the AD5251/AD5252 family and is confirmed in the Analog Devices datasheets.