AD5252BRUZ1-RL7
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 6830 PCS
- Package
- TSSOP-14
- Series
- 데이터 수집 - 디지털 전위기
AD5252BRUZ1-RL7과 AD5251BRU10에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD5252BRUZ1-RL7 and AD5251BRU10 are both dual-channel digital potentiometers from Analog Devices with comparable I2C interfaces and nonvolatile memory, making the AD5252BRUZ1-RL7 a viable functional replacement candidate for the AD5251BRU10 in many designs. However, the difference in end-to-end resistance (1 kΩ versus 10 kΩ) and package type (TSSOP-14 versus TSSOP-14) requires careful validation against the target application's resistance and board layout requirements before substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1-RL7 | AD5251BRU10 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the resolution of resistance adjustment; a 256-position device offers finer wiper granularity than a 64-position device, affecting achievable setpoints. |
| Number of Resistors / Channels | 2 | 2 | Indicates how many independent potentiometer channels are integrated, which affects board space and channel count in multi-channel designs. |
| End-to-End Resistance | 1 kΩ | 10 kΩ | Sets the nominal full-scale resistance of the potentiometer, directly influencing current, voltage division, and compatibility with surrounding circuitry. |
| Interface Type | I²C | Up/Down (3-wire) | Determines how the host controller communicates with the device; I²C and up/down interfaces are not directly interchangeable without protocol changes. |
| Nonvolatile Memory (EEPROM) | Yes | No | Nonvolatile storage retains the wiper setting across power cycles, which is critical for applications requiring known startup states. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the allowable power supply window; matching ranges allow similar system-level power design. |
| Package / Mounting | 14-TSSOP (Surface Mount) | 14-TSSOP (Surface Mount) | Package and mounting type affect PCB footprint, assembly, and thermal characteristics; identical packages ease layout substitution. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | Specifies the environmental range over which the device is guaranteed to operate, important for industrial and automotive applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1-RL7 | AD5251BRU10 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 2 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 10k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±20% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1-RL7 is a dual-channel, 256-position digital potentiometer (1 kΩ end-to-end resistance) in a 14-lead TSSOP package, while the AD5251BRU10 is a dual-channel, 64-position digital potentiometer (10 kΩ end-to-end resistance) in a 14-lead TSSOP package. The main differences are resolution (256 vs 64 positions) and nominal resistance (1 kΩ vs 10 kΩ).
Both devices are offered in a 14-lead TSSOP package, but pin compatibility cannot be assumed solely from package type. Designers must verify the pinout and function of each pin against the respective manufacturer datasheets before considering a layout-compatible substitution.
The AD5252BRUZ1-RL7 provides 256 positions (8-bit resolution) per channel. The AD5251BRU10 provides 64 positions (6-bit resolution) per channel.
The AD5252BRUZ1-RL7 has a nominal end-to-end resistance of 1 kΩ. The AD5251BRU10 has a nominal end-to-end resistance of 10 kΩ.
Both the AD5252 and AD5251 families use a 2-wire I²C-compatible serial interface. However, the exact protocol details, slave address options, and register maps should be confirmed from the respective datasheets before designing a shared interface.
No. Although both are dual-channel digital potentiometers in 14-lead TSSOP packages, they differ in resolution (64 vs 256 positions) and end-to-end resistance (10 kΩ vs 1 kΩ). A drop-in replacement would require validating all electrical, timing, and functional differences against the target design requirements.
Both the AD5252 and AD5251 are specified for single-supply operation from 2.7 V to 5.5 V, and also support dual-supply operation. Exact supply voltage limits and performance characteristics should be verified from the official manufacturer datasheets.
The AD5252BRUZ1-RL7 is better for finer adjustment granularity because it offers 256 positions per channel, compared to 64 positions per channel on the AD5251BRU10. The higher resolution allows smaller incremental resistance steps.