AD5252BRUZ1-RL7
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 6830 PCS
- Package
- TSSOP-14
- Series
- 데이터 수집 - 디지털 전위기
AD5252BRUZ1-RL7과 AD5251BRUZ100에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD5251BRUZ100 can serve as a functional replacement candidate for the AD5252BRUZ1-RL7 in applications tolerant of reduced resolution and single-channel operation, provided the system design accommodates the different end-to-end resistance and I²C address configuration. Design validation is recommended before committing to production substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1-RL7 | AD5251BRUZ100 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the resolution of the digital potentiometer; a 256-position device offers finer wiper adjustment than a 64-position device. |
| End-to-End Resistance | 1 kΩ | 100 kΩ | Sets the nominal resistance of the potentiometer, directly affecting the voltage divider ratio and current handling in the target circuit. |
| Number of Potentiometers | 2 | 1 | Indicates whether the device provides dual or single channels, which affects board space and the number of independently adjustable nodes. |
| Interface Type | I²C | Up/Down (3-wire) | Defines the digital control protocol; I²C allows addressable multi-device buses while up/down requires dedicated control lines. |
| Nonvolatile Memory | Yes (EEPROM) | No | Nonvolatile storage retains the wiper setting across power cycles, eliminating the need for re-initialization after each power-up. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the compatible power rails; both parts support the same range, allowing similar supply design. |
| Resistance Tolerance | ±30% | ±30% | Specifies the variation in end-to-end resistance, which impacts absolute accuracy of the divider ratio. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | Determines the environmental conditions under which the device can reliably operate. |
| Package / Mounting | 14-TSSOP (Surface Mount) | 14-TSSOP (Surface Mount) | Affects PCB footprint and assembly compatibility; identical packages allow drop-in replacement on the same land pattern. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1-RL7 | AD5251BRUZ100 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 2 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 100k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±20% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1-RL7 is a dual-channel, 8-bit digital potentiometer (256 positions) with a 1 kΩ end-to-end resistance, while the AD5251BRUZ100 is a dual-channel, 6-bit digital potentiometer (64 positions) with a 100 kΩ end-to-end resistance. Both are nonvolatile I²C-compatible devices in 14-lead TSSOP packages, but they differ in resolution, resistance value, and ordering quantity (RL7 denotes tape-and-reel packaging).
Yes. Both devices are offered in the same 14-lead TSSOP (RU-14) package and share the same pinout for I²C communication, address pins, and potentiometer terminals. However, pin compatibility does not guarantee functional equivalence because the wiper resolution and end-to-end resistance differ.
No, not without design validation. The AD5252BRUZ1-RL7 has 256 wiper positions and a 1 kΩ end-to-end resistance, whereas the AD5251BRUZ100 has 64 wiper positions and a 100 kΩ end-to-end resistance. These differences affect the wiper resistance, voltage divider ratios, and current-handling capability, so circuit performance must be re-evaluated before substitution.
The AD5252BRUZ1-RL7 (1 kΩ version) has a typical wiper resistance of 50 Ω, while the AD5251BRUZ100 (100 kΩ version) has a typical wiper resistance of 100 Ω. These values are specified in the respective manufacturer datasheets and affect the minimum achievable resistance and voltage divider accuracy.
Yes. Both the AD5252BRUZ1-RL7 and AD5251BRUZ100 include nonvolatile EEPROM that retains the wiper position after power-down, allowing the devices to power up in the previously stored setting without requiring external microcontroller intervention.
Both devices operate from a single 2.7 V to 5.5 V supply and support I²C-compatible serial communication at speeds up to 400 kHz. These parameters are common to the AD5251/AD5252 family and are verified in the Analog Devices datasheets.
In a voltage divider configuration, the AD5252BRUZ1-RL7 provides 256 steps (8-bit), yielding a step size of approximately 0.39% of the input voltage, while the AD5251BRUZ100 provides 64 steps (6-bit), yielding a step size of approximately 1.56% of the input voltage. The higher-resolution AD5252BRUZ1-RL7 allows finer adjustment of the output voltage.
Both the AD5252BRUZ1-RL7 and AD5251BRUZ100 are specified for the industrial temperature range of −40°C to +105°C, as stated in the Analog Devices datasheets. This makes them suitable for industrial and automotive applications within that range.