AD7495BRZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 2494 PCS
- Package
- SOIC-8
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
AD7495BRZ과 AD7492BRZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD7495BRZ and AD7492BRZ are both 12-bit successive-approximation ADCs from Analog Devices in the same SOIC-24 package and share a closely related architecture, making the AD7495BRZ a viable functional replacement candidate for the AD7492BRZ in many designs. However, the two devices differ in their digital interface and throughput characteristics, so the interface timing, host controller compatibility, and sampling requirements must be validated against the target application before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492BRZ | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization step size and nominal dynamic range are equivalent. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | Maximum throughput differs; the AD7492BRZ can sample faster, which matters for higher-bandwidth signal acquisition. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Both are single-channel devices, so channel count does not differentiate them for multiplexed system design. |
| Interface Type | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel (byte/word) | The digital interface differs fundamentally; serial vs parallel affects board routing, pin count, and host controller compatibility. |
| Supply Voltage (Analog and Digital) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Both support the same wide supply range, allowing operation from 3 V or 5 V systems without change. |
| Power Consumption | Approx. 4.5 mW at 3 V (1 MSPS) | Approx. 6 mW at 3 V (1.25 MSPS) | Power draw affects thermal budget and battery life; the AD7495BRZ is lower power at its rated throughput. |
| Package | 8-lead SOIC | 24-lead SOIC (wide body) | Package footprint and pin count differ significantly, so PCB layout and assembly cannot be directly swapped. |
| Reference | Internal 2.5 V reference | Internal 2.5 V reference | Both include an on-chip reference, simplifying design and giving comparable full-scale accuracy without external references. |
| Input Type | Single-ended, unipolar | Single-ended, unipolar | Identical input configuration means the same analog front-end conditioning can be reused. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492BRZ |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | Internal |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7495BRZ is a 12-bit successive-approximation ADC with a serial (SPI-compatible) interface, while the AD7492BRZ is a 12-bit SAR ADC with a parallel interface. Both are offered in a 24-lead SOIC package and operate from a 5 V supply, but they differ in digital interface, throughput, and internal reference configuration.
Both devices provide 12-bit resolution. The AD7495BRZ offers a throughput rate of up to 1 MSPS, and the AD7492BRZ offers a throughput rate of up to 1.25 MSPS, so the AD7492BRZ provides a higher maximum sampling rate.
The AD7495BRZ uses a serial interface compatible with SPI/QSPI/MICROWIRE/DSP protocols, making it suitable for systems with limited pin count. The AD7492BRZ uses a parallel interface for direct connection to a microprocessor or DSP data bus, which suits higher-speed parallel data acquisition architectures.
No. Although both are 24-lead SOIC devices, their digital interface architectures differ (serial versus parallel), so the pin functions and PCB layout requirements are not interchangeable. A direct drop-in substitution is not supported without redesigning the digital interface and validating the layout against the respective datasheets.
Both devices are 12-bit ADCs with a 5 V single-supply operation and provide an on-chip reference. The AD7495BRZ integrates a 2.5 V reference, and the AD7492BRZ also includes an internal reference. Both support a 0 V to VREF analog input range, but designers should confirm the exact reference voltage, input range, and configuration from the respective manufacturer datasheets before finalizing the design.
The AD7495BRZ is generally preferable for space-constrained or low-pin-count designs because its serial interface requires fewer digital I/O lines than the parallel interface of the AD7492BRZ. The AD7492BRZ is better suited to systems that require a parallel bus interface and higher throughput.
Yes. Both devices are specified for 5 V single-supply operation, so they can share the same analog supply rail in a system. However, the digital interface voltage levels and timing must still be verified against each device's datasheet and the host processor requirements.
Both the AD7495BRZ and AD7492BRZ are offered in a 24-lead SOIC package with the "B" grade temperature range. Designers should confirm the exact operating temperature range and package variant from the official manufacturer datasheet for the specific orderable part number.