ADS1210U
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 5384 PCS
- Package
- SOIC-8
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1210U과 ADS1201U/1K에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1201U/1K is a functionally compatible replacement candidate for the ADS1210U, sharing the same SOIC-24 footprint, 24-bit delta-sigma architecture, and wide operating temperature range. Designers should validate the differing output interface configuration and reference/supply arrangement before committing to a drop-in substitution in existing ADS1210U designs.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1201U/1K | Why it matters |
|---|---|---|---|
| Resolution (bits) | 20 | 24 | Higher resolution provides finer measurement granularity; the ADS1201 offers 4 more bits, enabling lower-noise, higher-precision conversions. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma modulation, so both are suited to low-frequency, high-resolution applications, but the specific modulator design affects noise and linearity performance. |
| Input Type | Differential | Differential | Differential inputs reject common-mode noise; both parts share this, supporting similar sensor interfacing topologies. |
| Data Interface | SPI / Serial | Serial (SPI-compatible) | Interface compatibility determines whether the part can drop into an existing digital bus; both use serial interfaces but with differing protocol details. |
| Supply Voltage | 5 V (analog and digital) | 5 V (analog and digital) | Matching supply rails simplifies power design and allows direct substitution without regulator changes. |
| Package | SOIC-18 | SOIC-16 | Different pin counts and footprints mean the parts are not drop-in replacements; PCB layout must be redesigned. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Identical industrial temperature ratings allow use in the same environmental conditions. |
| PGA / Gain Stage | Integrated PGA (1–128) | No integrated PGA | An integrated PGA allows direct connection of low-level sensors; the ADS1201 requires external amplification, affecting system complexity and BOM. |
| Output Data Rate | Up to ~19.5 kSPS | Up to ~1.5 kSPS | Data rate determines throughput; the ADS1210 supports faster sampling, while the ADS1201 trades speed for higher resolution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1201U/1K |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Last Time Buy | Active |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 24 b |
| Sampling Rate(Per Second) | 16k | 1k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 1 | - |
| Input Type | Differential | - |
| Configuration | PGA-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | PGA | - |
The ADS1210U is a 24-bit delta-sigma analog-to-digital converter with a programmable gain amplifier (PGA) and an SPI-compatible serial interface, housed in a 24-pin SOIC package. The ADS1201U is a 24-bit delta-sigma modulator that outputs a 1-bit data stream rather than fully decimated digital codes, and it is offered in a 24-pin SOIC package as well. The ADS1210U integrates the digital filter and provides complete conversion results, while the ADS1201U requires external digital filtering or a digital signal controller to process the modulator output.
Both devices are available in a 24-pin SOIC package, but they are not pin-for-pin interchangeable. The ADS1210U uses its pins for analog inputs, reference, clock, and SPI serial data lines, whereas the ADS1201U uses its pins for the modulator clock input and 1-bit data output. Designers must consult the respective datasheets for exact pin assignments before considering any board-level substitution.
The ADS1210U supports programmable output data rates up to approximately 15.6 kSPS in its fastest mode, depending on the selected gain and filter settings. The ADS1201U, as a modulator, produces a 1-bit stream at a clock rate up to 10 MHz, and the effective output word rate depends on the external digital filter and decimation ratio implemented by the host system.
The ADS1201U is generally preferred for isolated measurement systems because its 1-bit modulator output can be transmitted across a digital isolator with a single data line plus clock, simplifying galvanic isolation. The ADS1210U provides a complete SPI interface with multiple digital lines, which increases isolator channel count and complexity in isolated designs.
Both devices support a single +5 V analog supply in their standard configurations, with the ADS1210U also offering a +3 V operating mode. The ADS1201U is specified for +5 V operation. Designers should verify the exact supply range and reference requirements in the latest manufacturer datasheet for each device before sharing a common rail.
The ADS1210U provides a complete SPI-compatible serial interface that outputs fully converted 24-bit results along with configuration and status registers. The ADS1201U outputs only a 1-bit modulated data stream synchronized to an external clock, with no on-chip decimation filter or register interface, so the host must perform all digital filtering and conversion processing.
No. Although both are 24-bit delta-sigma devices in 24-pin SOIC packages, they differ in function, pinout, and digital interface. The ADS1210U delivers decimated conversion results over SPI, while the ADS1201U delivers a raw 1-bit modulator stream. A direct drop-in replacement is not possible without redesigning the digital interface and signal processing chain.