ADS1210U vs ADS1252U/2K5G4

ADS1210U과 ADS1252U/2K5G4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1210U and ADS1252U/2K5G4 are both 24-bit delta-sigma ADCs, but they differ fundamentally in resolution architecture, interface protocol, package footprint, and reference/supply configuration, so the ADS1252U/2K5G4 cannot serve as a direct drop-in substitute for the ADS1210U without redesign and validation.

Different interface protocol Different package footprint Different data rate capability Different reference configuration

Parts at a glance

Part A

ADS1210U

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
5384 PCS
Package
SOIC-8
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS1252U/2K5G4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
8737 PCS
Package
SOIC-8
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1210U ADS1252U/2K5G4 Why it matters
Resolution (bits) 24 24 Both are 24-bit delta-sigma ADCs, so resolution alone does not distinguish them for substitutability.
Maximum Sample Rate (SPS) 10 40000 The ADS1252 offers a far higher throughput, making it suitable for faster signal acquisition where the ADS1210 would be too slow.
Number of Input Channels 1 (differential) 1 (differential) Both provide a single differential input, so channel count is not a differentiator.
Input Type Differential Differential Differential inputs on both parts provide common-mode noise rejection for low-level sensor signals.
Interface SPI (serial) SPI (serial) Both use a serial SPI-compatible interface, simplifying drop-in replacement at the digital interface level.
Supply Voltage (V) 5 5 Matching 5 V supply simplifies power-rail compatibility when substituting one part for the other.
Package SOIC-18 SOIC-8 Different package footprints and pin counts mean the parts are not drop-in compatible on the same PCB layout.
PGA / Internal Gain Yes (1 to 16) No The ADS1210's programmable gain amplifier allows direct connection of low-level sensors, while the ADS1252 requires external signal conditioning.
Operating Temperature Range (°C) -40 to +85 -40 to +85 Identical industrial temperature ranges mean both are suitable for the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1210U ADS1252U/2K5G4
Supplier - Texas Instruments
Part Status Last Time Buy Discontinued at Digi-Key
Number of Bits 24 24
Sampling Rate(Per Second) 16k 40k
Number of Inputs 1 1
Input Type Differential Differential
Data Interface SPI SPI
Configuration PGA-ADC ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External, Internal External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Features PGA -

Frequently asked questions

What are the key architectural differences between the ADS1210U and the ADS1252U/2K5G4?

The ADS1210U is a 24-bit delta-sigma analog-to-digital converter with a programmable gain amplifier (PGA) and a flexible SPI-compatible serial interface, housed in a 24-pin SOIC package. The ADS1252U/2K5G4 is a 24-bit delta-sigma ADC with a fixed-gain, high-speed serial interface and is supplied in a 16-pin SOIC package. The ADS1210U offers programmable gain settings and a wider feature set, while the ADS1252U/2K5G4 is optimized for simpler, high-speed data acquisition with a fixed input range.

Are the ADS1210U and ADS1252U/2K5G4 pin-compatible or package-compatible?

No. The ADS1210U is packaged in a 24-pin SOIC (wide-body), while the ADS1252U/2K5G4 is packaged in a 16-pin SOIC. The pin counts, pin functions, and package footprints differ, so they are not drop-in replacements for each other and require different PCB land patterns.

What are the maximum output data rates for each device?

The ADS1210U supports programmable output data rates up to 15.6 kSPS depending on the gain and mode settings. The ADS1252U/2K5G4 supports a fixed output data rate of up to 41.7 kSPS. The ADS1252U/2K5G4 is therefore better suited for higher-speed sampling applications, while the ADS1210U offers flexibility in trading speed for resolution and gain.

Do both devices include a programmable gain amplifier (PGA)?

No. The ADS1210U includes an on-chip programmable gain amplifier with selectable gains of 1, 2, 4, 8, and 16, allowing direct connection of low-level sensors. The ADS1252U/2K5G4 does not include a PGA; it has a fixed input range and requires external signal conditioning for low-level signals.

What are the supply voltage and reference requirements for each device?

The ADS1210U operates from a single +5 V analog supply (with a +2.5 V reference typical) and supports a differential input range set by the reference and gain. The ADS1252U/2K5G4 operates from a +5 V analog supply and uses an external reference; its input range is defined by the reference voltage. Both devices require an external voltage reference for accurate conversion, and the reference specifications should be verified against the respective datasheets for the target design.

Which device is more suitable for low-level sensor interfacing?

The ADS1210U is generally more suitable for low-level sensor interfacing because it integrates a programmable gain amplifier (up to gain 16) and supports a differential input, allowing small sensor signals to be amplified before conversion. The ADS1252U/2K5G4 lacks an internal PGA and is better suited to applications where the input signal is already conditioned to match its fixed input range.

Can the ADS1252U/2K5G4 be used as a direct replacement for the ADS1210U in an existing design?

No. The two devices differ in package pin count (24-pin vs 16-pin SOIC), pin functions, gain architecture, and maximum data rate. A direct replacement is not possible without redesigning the PCB layout, signal conditioning, and firmware to accommodate the different interface and input range of the ADS1252U/2K5G4.

What serial interface does each device use?

The ADS1210U uses a flexible SPI-compatible serial interface with programmable word length and mode settings, supporting both master and slave operation. The ADS1252U/2K5G4 uses a high-speed, fixed-format serial interface designed for simple, high-throughput data readout. The interface protocols and timing requirements differ, so firmware must be adapted accordingly when comparing or migrating between the two devices.