ADS1210U
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 5384 PCS
- Package
- SOIC-8
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1210U과 ADS1250UG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1210U and ADS1250UG4 are both 24-bit delta-sigma analog-to-digital converters, but they differ in resolution architecture, sampling rate, package footprint, and interface configuration, so the ADS1250UG4 cannot serve as a direct drop-in substitute for the ADS1210U without design validation.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1250UG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 20 | Higher resolution provides finer measurement granularity; a 24-bit ADC resolves smaller signal changes than a 20-bit ADC, affecting precision-critical applications. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma conversion, which offers high resolution and low noise for low-frequency signals, supporting similar noise-shaping behavior. |
| Sampling Rate (max) | 10 kSPS | 40 kSPS | Maximum sampling rate determines the highest signal bandwidth that can be captured; the ADS1250UG4 supports faster data acquisition than the ADS1210U. |
| Number of Input Channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator for multi-channel system design. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying microcontroller connection and allowing similar digital host integration. |
| Supply Voltage (analog) | 5 V | 5 V | Analog supply voltage must match the system's analog rail; both operating at 5 V supports similar analog front-end design. |
| Package / Mounting | SOIC-18 (surface mount) | SOIC-16 (surface mount) | Package footprint and pin count affect PCB layout and drop-in compatibility; differing pin counts require layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range determines suitability for industrial environments; identical ranges mean comparable environmental robustness. |
| Input Type | Differential | Differential | Differential inputs reject common-mode noise, improving accuracy in noisy environments; both share this benefit. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1250UG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Last Time Buy | Obsolete |
| Number of Bits | 24 | 20 |
| Sampling Rate(Per Second) | 16k | 25k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Features | PGA | PGA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1210U is a 24-bit delta-sigma analog-to-digital converter with a programmable gain amplifier, offering a maximum data rate of 16 kSPS. The ADS1250UG4 is a 20-bit delta-sigma ADC with a maximum data rate of 25 kSPS. The ADS1210U provides higher resolution, while the ADS1250UG4 offers a faster maximum output rate.
No. The ADS1210U is supplied in a 24-pin SOIC (DW) package, while the ADS1250UG4 is supplied in a 20-pin SOIC (DW) package. The different pin counts and pin functions prevent direct PCB drop-in replacement without layout changes.
The ADS1210U supports a maximum data rate of 16 kSPS. The ADS1250UG4 supports a maximum data rate of 25 kSPS, making it the faster option for higher-throughput applications.
The ADS1210U provides 24-bit resolution, while the ADS1250UG4 provides 20-bit resolution. The ADS1210U is better suited for high-resolution, low-speed measurement applications, whereas the ADS1250UG4 balances moderate resolution with higher throughput.
No. The ADS1210U features a differential analog input with a programmable gain amplifier (PGA) supporting gains from 1 to 128. The ADS1250UG4 has a differential input but does not include the same PGA gain range. Designers must verify input range and gain requirements against the respective datasheets.
Both devices operate from a single 5 V analog supply and provide a serial interface for communication with a host controller. The ADS1210U uses a synchronous serial interface, while the ADS1250UG4 uses an SPI-compatible serial interface. Always confirm timing and logic-level requirements in the manufacturer datasheets.
No. Differences in package pin count, resolution, maximum data rate, input gain configuration, and serial interface timing mean the two devices are not interchangeable without design validation. A replacement requires reviewing the schematic, PCB layout, and firmware against the target device datasheet.