ADS1259IPWR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 6414 PCS
- Package
- TSSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS1259IPWR과 ADS1230IPW에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS1230IPW and ADS1259IPWR are not drop-in replacements for one another. Although both are 24-bit delta-sigma ADCs in TSSOP packages, they differ fundamentally in resolution architecture, interface type, input configuration, and supply requirements, so the ADS1259IPWR cannot be substituted directly for the ADS1230IPW without a full design review.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1230IPW | ADS1259IPWR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 20 | 24 | Higher resolution enables finer measurement of small signal changes, which is critical for precision sensing applications. |
| Number of input channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator for substitutability. |
| Data rate (max SPS) | 80 | 14400 | A much higher maximum sample rate allows faster signal acquisition and wider bandwidth for dynamic measurements. |
| Interface | SPI (2-wire, read-only) | SPI (bidirectional) | Interface compatibility affects how easily the part can be dropped into an existing digital bus and firmware design. |
| Supply voltage (analog) | 2.7 V to 5.3 V | 4.75 V to 5.25 V | The wider analog supply range of the ADS1230 allows operation from lower-voltage rails, affecting system power design. |
| PGA / gain stages | Fixed gain 128 | Programmable (1 to 128) | A programmable gain amplifier provides flexibility to match different sensor signal amplitudes without external conditioning. |
| Package | 16-TSSOP | 20-TSSOP | Different package footprints and pin counts require PCB layout changes, impacting direct board-level substitution. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +105 °C | A wider temperature range supports use in harsher environments and industrial applications. |
| Internal oscillator | Yes (on-chip) | Yes (on-chip) | An integrated oscillator simplifies design by removing the need for an external clock source. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1259IPWR | ADS1230IPW |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 24 | 20 |
| Sampling Rate(Per Second) | 14k | 80 |
| Number of Inputs | 1 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | ADC | PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 2.7V ~ 5.3V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 2.7V ~ 5.3V |
| Features | PGA | PGA |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
The ADS1230IPW is a 20-bit delta-sigma ADC designed for bridge sensor applications, featuring an on-chip PGA with gains of 1, 2, 64, and 128, and a maximum data rate of 80 SPS. The ADS1259IPWR is a 24-bit delta-sigma ADC with a programmable gain amplifier (gains 1 to 128), a maximum data rate of 14.4 kSPS, and integrated features such as a voltage reference and oscillator, targeting higher-resolution, higher-speed industrial measurement systems.
No. The ADS1230IPW is offered in a 16-pin TSSOP package, while the ADS1259IPWR is offered in a 20-pin TSSOP package. The differing pin counts and pin functions mean they are not drop-in replacements and require separate PCB layouts.
The ADS1230IPW provides 20-bit resolution with output data rates of 10 SPS or 80 SPS. The ADS1259IPWR provides 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1259IPWR therefore offers higher resolution and significantly faster throughput, while the ADS1230IPW targets low-speed, high-accuracy bridge measurements.
Yes, both include an on-chip PGA. The ADS1230IPW supports selectable gains of 1, 2, 64, and 128. The ADS1259IPWR supports programmable gains from 1 to 128. The gain options and associated input ranges differ, so signal-chain design must be validated against each datasheet.
The ADS1230IPW operates from a single analog supply (AVDD) of 2.7 V to 5.3 V and a digital supply (DVDD) of 2.7 V to 5.3 V. The ADS1259IPWR operates from an analog supply of 4.75 V to 5.25 V and a digital supply of 2.7 V to 5.25 V. Designs must confirm supply rails meet these ranges before substitution.
The ADS1259IPWR is better suited for higher-speed industrial measurement because it supports data rates up to 14.4 kSPS with 24-bit resolution and integrates a voltage reference and oscillator. The ADS1230IPW is limited to 80 SPS and is intended primarily for low-frequency bridge sensor applications.
No. The ADS1259IPWR includes an integrated voltage reference, whereas the ADS1230IPW requires an external reference voltage for ratiometric bridge measurements. This difference affects external component count and system accuracy budgeting.
Both devices use a serial interface for data output. The ADS1230IPW provides a simple two-wire serial interface (SCLK and DOUT/DRDY). The ADS1259IPWR uses an SPI-compatible serial interface. System firmware and host interface timing must be revalidated when comparing or migrating between the two parts.