ADS7843E vs ADS7841EG4

ADS7843E과 ADS7841EG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7841EG4 are not drop-in replacements for one another. Although both are 12-bit successive-approximation ADCs in a 16-pin SSOP package, they differ in resolution of control interface, channel configuration, and conversion architecture, so the ADS7841EG4 cannot be substituted directly for the ADS7843E without circuit and firmware redesign.

Different interface type Different channel configuration Different conversion architecture Different control protocol

Parts at a glance

Part A

ADS7843E

벨 브라운

Lifecycle
Active
Stock
6691 PCS
Package
SSOP-16
Series
데이터 수집 - 터치스크린 컨트롤러
Part B

ADS7841EG4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
8773 PCS
Package
SSOP-16
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7841EG4 Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so resolution is equivalent for substitutability.
Number of Input Channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be multiplexed into the ADC.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing similar host microcontroller connections.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Compatible supply ranges allow operation in the same system power domains.
Sampling Rate 125 kSPS 200 kSPS Higher sampling rate supports faster signal acquisition; a difference may affect timing-critical designs.
Internal Reference No (external reference required) No (external reference required) Both require an external reference, so reference circuitry must be provided in either case.
Package / Mounting 16-SSOP (surface mount) 16-SSOP (surface mount) Identical package and footprint enable direct board-level replacement.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Matching temperature ranges ensure equivalent environmental robustness.
Power Consumption Low power (typ. ~0.5 mW at 2.7 V) Low power (typ. ~0.9 mW at 5 V) Power draw affects battery life and thermal budget in portable designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7841EG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 125°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the key differences between the ADS7843E and ADS7841EG4?

The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, housed in a 16-pin SSOP package. The ADS7841EG4 is a 4-channel, 12-bit SAR ADC with an SPI-compatible serial interface, housed in a 16-pin SSOP package (the "G4" suffix denotes lead-free/RoHS-compliant construction). The ADS7843E integrates touch screen drive and sense control logic, while the ADS7841EG4 is a general-purpose 4-channel ADC without touch screen control circuitry.

Are the ADS7843E and ADS7841EG4 pin-compatible?

No. Although both devices are offered in a 16-pin SSOP package, their pin functions differ. The ADS7843E includes touch screen driver outputs (X+, X-, Y+, Y-) and a pen-interrupt output, whereas the ADS7841EG4 provides four analog input channels (CH0–CH3) with a different pin assignment. They are not direct pin-for-pin replacements.

Can the ADS7843E be replaced by the ADS7841EG4 in an existing design?

No, not as a direct drop-in replacement. The ADS7843E contains dedicated touch screen control logic and drive outputs that the ADS7841EG4 does not provide. Substitution would require redesign of the analog front end, the control firmware, and the PCB layout to accommodate the different pin functions and the absence of touch screen drive circuitry.

What is the resolution and architecture of both devices?

Both the ADS7843E and ADS7841EG4 use a 12-bit successive-approximation register (SAR) ADC architecture, providing 12-bit resolution over their respective analog input ranges.

What type of serial interface do the ADS7843E and ADS7841EG4 use?

Both devices use an SPI-compatible serial interface for communication with a host microcontroller or processor, supporting standard serial clock, data-in, data-out, and chip-select signals.

What are the typical applications for each device?

The ADS7843E is intended for 4-wire resistive touch screen digitizer applications such as handheld terminals, PDAs, and portable instruments. The ADS7841EG4 is a general-purpose 4-channel 12-bit ADC suited to industrial measurement, data acquisition, and multi-channel sensor monitoring where touch screen control is not required.

Does the "G4" suffix on the ADS7841EG4 indicate a functional difference from the ADS7843E?

No. The "G4" suffix on the ADS7841EG4 denotes lead-free (RoHS-compliant) packaging and does not indicate a functional or parametric change relative to the base ADS7841. It does not make the device functionally equivalent to the ADS7843E, which remains a distinct touch screen controller product.