ADS7843E vs ADS7842E/1KG4

ADS7843E과 ADS7842E/1KG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7842E/1KG4 are not drop-in replacements for one another. Although both are 12-bit touch screen controller ADCs from Texas Instruments, they differ in resolution, interface type, package, and channel configuration, so a direct substitution is not possible without design changes.

Different resolution Different interface type Different package Different channel configuration

Parts at a glance

Part A

ADS7843E

벨 브라운

Lifecycle
Active
Stock
6691 PCS
Package
SSOP-16
Series
데이터 수집 - 터치스크린 컨트롤러
Part B

ADS7842E/1KG4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
9177 PCS
Package
SSOP-28
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7842E/1KG4 Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so resolution is equivalent for touchscreen coordinate digitizing.
Number of Input Channels 4 single-ended / 2 differential 4 single-ended / 2 differential Channel count determines how many touchscreen axes or auxiliary inputs can be sampled.
Interface Type SPI (serial) SPI (serial) A matching serial interface ensures the same host microcontroller communication protocol can be reused.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Compatible supply ranges allow the parts to operate in the same system power domain.
Package / Mounting 16-SSOP (surface mount) 16-SSOP (surface mount) Identical package and footprint enable drop-in board replacement without layout changes.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Matching temperature ratings confirm suitability for the same industrial/commercial environments.
Touchscreen Controller Function 4-wire resistive touchscreen controller 4-wire resistive touchscreen controller Both target 4-wire resistive panels, so the sensing topology and drive scheme are interchangeable.
Internal Reference External reference required External reference required Both rely on an external reference, so the same reference circuit and accuracy budget apply.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7842E/1KG4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - Parallel
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Features - Selectable Address
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 85°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the ADS7843E and the ADS7842E/1KG4?

The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface. The ADS7842E/1KG4 is a 4-channel, 12-bit parallel-output sampling ADC with an internal reference, designed for general-purpose data acquisition rather than touch screen control. The ADS7843E includes touch-pressure measurement and pen-interrupt output features, while the ADS7842E/1KG4 provides a parallel microprocessor interface and does not include touch screen control logic.

Are the ADS7843E and ADS7842E/1KG4 pin-compatible or package-compatible?

No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7842E/1KG4 is supplied in a 28-pin SSOP package. The two devices have different pin counts, pin functions, and PCB land patterns, so they are not drop-in replacements for one another.

Do both devices use the same digital interface?

No. The ADS7843E uses an SPI-compatible 3-wire serial interface for communication with a host controller. The ADS7842E/1KG4 uses a parallel interface with a data bus and control lines for direct connection to a microprocessor. The interface architectures are fundamentally different and require different host-side firmware and wiring.

What are the ADC resolution and sampling characteristics of each device?

Both devices are 12-bit successive-approximation register (SAR) ADCs. The ADS7843E is specified for touch screen coordinate conversion with a throughput rate up to 125 kHz. The ADS7842E/1KG4 provides a 12-bit parallel output with a specified conversion and throughput rate suitable for general-purpose sampling; designers should consult the respective manufacturer datasheet for the exact timing and throughput specifications.

Can the ADS7843E be used as a general-purpose ADC in place of the ADS7842E/1KG4?

Not directly. The ADS7843E is optimized for 4-wire resistive touch screen coordinate and pressure measurement, with its input configuration and control logic tailored to that application. The ADS7842E/1KG4 is a general-purpose 4-channel sampling ADC with a parallel output bus. Substitution would require validating input ranges, reference configuration, interface timing, and control logic against the target design, and is not a supported direct replacement.

Do both devices require an external voltage reference?

The ADS7843E uses an external reference voltage applied to its VREF pin to set the ADC full-scale range. The ADS7842E/1KG4 includes an internal reference, though the reference configuration and any external reference options should be verified against the manufacturer datasheet for the specific grade and package.

What supply voltage ranges do the ADS7843E and ADS7842E/1KG4 support?

Both devices are specified for a single-supply operation in the 2.7 V to 5.25 V range, with separate digital and analog supply considerations. Exact minimum, maximum, and recommended operating conditions should be confirmed from the official manufacturer datasheets for each device before design use.

Are the ADS7843E and ADS7842E/1KG4 suitable for the same end applications?

No. The ADS7843E is intended for 4-wire resistive touch screen systems such as handheld devices, PDAs, and portable instruments. The ADS7842E/1KG4 is intended for general-purpose multi-channel data acquisition, industrial measurement, and microprocessor-based systems requiring a parallel ADC interface. Application suitability should be validated against each device's datasheet specifications.