ADS7843E
벨 브라운
- Lifecycle
- Active
- Stock
- 6691 PCS
- Package
- SSOP-16
- Series
- 데이터 수집 - 터치스크린 컨트롤러
ADS7843E과 ADS7841ESG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7843E and ADS7841ESG4 are not functionally interchangeable despite sharing a similar 12-bit SAR architecture and 16-pin package family. The ADS7843E integrates a resistive touch-screen driver interface with differential channel switching, while the ADS7841ESG4 is a 4-channel single-ended ADC with a different serial control word and conversion timing. Pin functions, control register format, and analog input configuration differ, so a direct board-level swap is not supported without redesign.
벨 브라운
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841ESG4 | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility in most designs. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges ensure the parts can operate in the same power domain. |
| Package / Mounting | 16-SSOP (Surface Mount) | 16-SSOP (Surface Mount) | Identical package and footprint allow physical board-level interchangeability. |
| Sampling Rate | 125 kSPS | 200 kSPS | Higher sampling rate in the ADS7841ESG4 supports faster signal acquisition; a difference that may affect timing-critical designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings confirm suitability for the same environmental conditions. |
| Power Consumption (Typical) | Low power (approx. 500 µA at 5 V) | Low power (approx. 500 µA at 5 V) | Similar power draw means no change to thermal or battery-life budgets. |
| Reference Input | External reference | External reference | Both require an external reference, so the same reference circuit can be reused. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841ESG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touch screen controller with an integrated 12-bit ADC and on-chip drivers for touch panel excitation, while the ADS7841ESG4 is a standalone 12-bit, 4-channel successive-approximation ADC without touch screen control logic or panel drivers. The ADS7843E is intended for touch digitizer applications, whereas the ADS7841ESG4 is a general-purpose 4-channel ADC.
No. The ADS7843E is offered in a 16-pin SSOP package, and the ADS7841ESG4 is offered in a 16-pin QSOP package. Although both are 16-pin devices, the pin functions differ because the ADS7843E includes touch panel drive and sense pins (X+, X-, Y+, Y-, and PENIRQ) that the ADS7841ESG4 does not have. They are not pin-for-pin compatible.
No. The ADS7843E cannot be used as a direct drop-in replacement for the ADS7841ESG4. The ADS7843E is a touch screen controller with integrated panel drivers and a PENIRQ output, while the ADS7841ESG4 is a general-purpose 4-channel ADC. Their pin functions, package types, and control interfaces differ, so substitution requires design validation against the respective datasheets.
Both devices use a 12-bit successive-approximation register (SAR) ADC architecture. The ADS7843E provides 12-bit resolution for touch screen coordinate measurement, and the ADS7841ESG4 provides 12-bit resolution across its 4 analog input channels. Both are specified as 12-bit SAR converters in their respective manufacturer datasheets.
The ADS7843E is configured for 4-wire resistive touch screen panels, with dedicated X+, X-, Y+, and Y- drive/sense lines and a PENIRQ interrupt output. The ADS7841ESG4 provides 4 single-ended analog input channels (CH0 through CH3) or 2 differential input pairs, selectable via its digital control interface. The input configuration is therefore application-specific and not interchangeable.
Both devices use a serial digital interface for control and data transfer. The ADS7843E uses a serial interface to command touch screen conversions and read coordinate data, and it provides a PENIRQ output to signal pen contact. The ADS7841ESG4 uses a serial interface to select input channels and read conversion results. The command sets and control word formats are device-specific and are not identical.
Both devices are specified for single-supply operation in the 2.7 V to 5.25 V range per their manufacturer datasheets. Designers should confirm the exact supply and reference conditions in the respective datasheet before finalizing a design, as performance specifications are defined under specific operating conditions.
For a 4-wire resistive touch screen digitizer design, the ADS7843E is the appropriate choice because it integrates the panel drive and sense functions plus a pen-interrupt output. For general-purpose multi-channel analog signal acquisition, the ADS7841ESG4 is the appropriate choice because it provides 4 selectable input channels without touch screen-specific circuitry. Selection should be based on the verified requirements of the target application.