ADS7887SDCKR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2563 PCS
- Package
- SOT-SC70-6
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7887SDCKR과 ADS7868IDBVR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7868IDBVR and ADS7887SDCKR are both 8-bit, single-channel SAR ADCs with SPI-compatible serial interfaces, making them functionally comparable for many low-resolution sampling applications. However, they differ in package footprint (SOT-23-6 vs SC-70-6), maximum sampling rate, and supply voltage range, so board-level validation is required before substituting one for the other in an existing design.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7868IDBVR | ADS7887SDCKR | Why it matters |
|---|---|---|---|
| Resolution | 8 bit | 10 bit | Higher resolution provides finer quantization of the analog input, directly affecting measurement accuracy and dynamic range. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | Maximum throughput determines how fast the ADC can digitize signals; a higher rate supports wider-bandwidth inputs. |
| Number of Input Channels | 1 single-ended | 1 single-ended | Channel count and configuration define how many signals can be measured and whether differential or single-ended wiring is required. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.35 V to 5.5 V | The supply range must match the system rail; a wider low-end range allows operation from lower-voltage supplies. |
| Interface Type | SPI (serial) | SPI (serial) | The digital interface must be compatible with the host controller for direct communication without glue logic. |
| Package / Case | SOT-23-6 | SC-70-6 | Package footprint and pinout must match the PCB layout for a drop-in replacement; different packages require layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +125 °C | The temperature range must cover the application environment; a wider range offers margin in harsh conditions. |
| Input Type | Single-ended, unipolar | Single-ended, unipolar | Input configuration determines signal conditioning needs and whether the ADC can directly accept the sensor output. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7887SDCKR | ADS7868IDBVR |
|---|---|---|
| Series | microPOWER™ | microPOWER™ |
| Part Status | Active | Active |
| Number of Bits | 10 | 8 |
| Sampling Rate(Per Second) | 1.25M | 280k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | Supply | Supply |
| Voltage - Supply, Analog | 2.35V ~ 5.25V | 1.2V ~ 3.6V |
| Voltage - Supply, Digital | 2.35V ~ 5.25V | 1.2V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
The ADS7868IDBVR is a 12-bit, 1-MSPS SAR ADC in a SOT-23-6 package, while the ADS7887SDCKR is a 10-bit, 1.25-MSPS SAR ADC in an SC-70-6 package. The ADS7868 offers higher resolution, whereas the ADS7887 provides a slightly higher sampling rate and a smaller package footprint.
No. The ADS7868IDBVR uses a 6-pin SOT-23 (DBV) package, and the ADS7887SDCKR uses a 6-pin SC-70 (DCK) package. Although both are 6-pin packages, the package outlines and PCB land patterns differ, so they are not drop-in replacements without layout changes.
The ADS7868IDBVR provides 12-bit resolution at a maximum throughput of 1 MSPS. The ADS7887SDCKR provides 10-bit resolution at a maximum throughput of 1.25 MSPS. Selection depends on whether higher accuracy or higher sample rate is prioritized.
Both devices are single-channel, unipolar SAR ADCs with a pseudo-differential input structure referenced to a supplied reference voltage. Designers should confirm the exact input voltage range and reference requirements from the respective datasheets, as the full-scale input is set by the applied reference on both parts.
Both devices operate from a single analog supply in the 2.7 V to 5.25 V range, with a separate digital I/O supply pin (VIO) that allows interfacing to lower-voltage logic. This makes both parts suitable for mixed-supply systems.
Both the ADS7868IDBVR and ADS7887SDCKR use a SPI-compatible serial interface with a chip-select, serial clock, and serial data output. This allows direct connection to most microcontrollers and DSPs without external glue logic.
Not directly. Substitution requires verifying resolution (10-bit vs 12-bit), package footprint (SC-70 vs SOT-23), and PCB land pattern compatibility. The lower resolution of the ADS7887SDCKR may also affect system accuracy, so the design must be revalidated against the application's error budget.
The ADS7887SDCKR in the SC-70 (DCK) package occupies a smaller board area than the ADS7868IDBVR in the SOT-23 (DBV) package. For layouts where footprint is the primary constraint, the SC-70 option is preferable, provided the 10-bit resolution meets the accuracy requirement.