ADS7887SDCKR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2563 PCS
- Package
- SOT-SC70-6
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7887SDCKR과 ADS7887MDBVT에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7887SDCKR and ADS7887MDBVT share the same core 10-bit SAR ADC architecture, resolution, and serial interface, making them functionally interchangeable in most designs. The primary distinction lies in their package and qualification grade, so the ADS7887MDBVT can serve as a functional replacement for the ADS7887SDCKR where the extended temperature range and alternate package footprint are acceptable.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7887SDCKR | ADS7887MDBVT | Why it matters |
|---|---|---|---|
| Resolution | 10 bit | 10 bit | Determines the number of discrete output codes and thus the achievable measurement precision; identical resolution means equivalent quantization performance. |
| Sampling Rate | 1.25 MSPS | 1.25 MSPS | Sets the maximum throughput for capturing fast-changing signals; matching rates allow direct substitution in timing-critical acquisition designs. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Defines how many analog signals can be digitized; both being single-channel single-ended means the same signal topology can be reused. |
| Supply Voltage | 2.35 V to 5.25 V | 2.35 V to 5.25 V | Determines compatibility with the system power rail and the input voltage range; identical ranges ensure the same supply design works for both. |
| Interface Type | SPI (serial) | SPI (serial) | Defines how the ADC communicates with the host controller; matching SPI interfaces allow the same firmware and bus wiring to be used. |
| Operating Temperature Range | -40 °C to +125 °C | -55 °C to +125 °C | Specifies the environmental limits for reliable operation; the wider military-grade range of the MDBVT variant matters for harsh or extended-temperature applications. |
| Package / Case | SOT-23-6 (SC-70-6) | SOT-23-6 | Affects PCB footprint and assembly; differing package designations may require layout verification before substitution. |
| Product Grade / Qualification | Industrial grade | Military grade (extended temperature) | Indicates screening and qualification level; the military-grade variant is suited to higher-reliability and wider-temperature applications, which affects cost and sourcing. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7887SDCKR | ADS7887MDBVT |
|---|---|---|
| Supplier | - | Texas Instruments |
| Series | microPOWER™ | microPOWER™ |
| Part Status | Active | Obsolete |
| Number of Bits | 10 | 10 |
| Sampling Rate(Per Second) | 1.25M | 1.25M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | Supply | Supply |
| Voltage - Supply, Analog | 2.35V ~ 5.25V | 2.35V ~ 5.25V |
| Voltage - Supply, Digital | 2.35V ~ 5.25V | 2.35V ~ 5.25V |
| Operating Temperature | -40°C ~ 125°C | -55°C ~ 125°C |
Both devices are 10-bit, 1.25-MSPS micropower SAR ADCs from Texas Instruments with a 2.35-V to 5.25-V supply range and a pseudo-differential input. The primary differences are package and ordering variant: the ADS7887SDCKR is supplied in a 6-pin SOT-23 (SC-70) tape-and-reel package, while the ADS7887MDBVT is supplied in a 6-pin SOT-23 (DBV) package in small tape-and-reel quantities. Both share the same core electrical specifications per the TI datasheet.
Yes. Per the Texas Instruments ADS7887 datasheet, both orderable part numbers are the same silicon device with identical electrical characteristics (10-bit resolution, 1.25 MSPS, SPI-compatible serial interface, 2.35-V to 5.25-V supply). The differences are limited to package/ordering designation and reel quantity, so they are electrically interchangeable when the PCB footprint matches the respective package.
The ADS7887SDCKR uses the DCK package, a 6-pin SOT-23 (SC-70) body, supplied on tape and reel. The ADS7887MDBVT uses the DBV package, a 6-pin SOT-23 body, supplied on small tape and reel. Designers should confirm the exact package drawing and land pattern from the TI datasheet before layout.
Both the ADS7887SDCKR and ADS7887MDBVT are 10-bit successive-approximation register (SAR) ADCs with a maximum throughput of 1.25 MSPS, as specified in the Texas Instruments ADS7887 datasheet.
Both devices operate from a single supply of 2.35 V to 5.25 V, per the TI ADS7887 datasheet. The digital interface is compatible with the same supply rail, and the devices are specified for operation over the industrial temperature range of -40°C to +125°C.
Both parts provide an SPI-compatible serial interface with a dedicated CS (chip select) and SCLK (serial clock) for reading conversion results. The interface supports daisy-chaining and is compatible with most microcontrollers and DSPs, per the TI ADS7887 datasheet.
Only if the PCB land pattern accommodates the DBV package instead of the DCK package. Because both are 6-pin SOT-23 variants with the same pinout and electrical specifications per the TI datasheet, the substitution is feasible after verifying the package footprint and reel quantity requirements for the assembly line.