ADS8345E/2K5
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 3595 PCS
- Package
- SSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS8345E/2K5과 ADS830EG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS8345E/2K5 and ADS830EG4 are not functionally interchangeable. The ADS8345E/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial SPI/QSPI interface in a 20-pin SSOP package, while the ADS830EG4 is an 8-bit, single-channel pipelined ADC with a parallel output interface in a 20-pin SOIC package. The differences in resolution, channel count, output interface, and package footprint make direct substitution impractical without a complete redesign of the surrounding circuitry.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS830EG4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 8 bit | Resolution determines the smallest signal change the ADC can distinguish; a 16-bit part offers far finer quantization than an 8-bit part, so they are not functionally interchangeable in precision applications. |
| Number of Input Channels | 8 single-ended / 4 differential | 1 single-ended | Channel count defines how many signals can be digitized; the multi-channel ADS8345 suits multiplexed multi-sensor systems, while the single-channel ADS830 targets one high-speed signal path. |
| Sampling Rate | 100 kSPS | 60 MSPS | Maximum sample rate sets the bandwidth of signals that can be captured; the ADS830 is roughly 600x faster, making it suitable for high-frequency/IF sampling where the ADS8345 cannot be used. |
| Architecture | SAR (successive approximation) | Pipeline | Converter architecture affects latency, speed, and power trade-offs; SAR offers low latency and low power at moderate speed, while pipeline enables very high throughput at the cost of latency and power. |
| Interface | SPI / serial (QSPI, Microwire, DSP compatible) | Parallel (8-bit) | The digital interface must match the host controller; a serial SPI device and a parallel-output device require different board routing and firmware, preventing drop-in substitution. |
| Supply Voltage | 2.7 V to 5.25 V (analog and digital) | 5 V (single supply) | Supply voltage compatibility determines whether the part can operate in a given system rail; the wide-range ADS8345 supports low-voltage designs, whereas the ADS830 requires a 5 V rail. |
| Input Configuration | Single-ended or differential (software selectable) | Single-ended | Differential inputs improve noise immunity and dynamic range; only the ADS8345 offers this flexibility, which matters for low-level or noisy signal environments. |
| Package | SSOP-20 | SOIC-20 | Package footprint and pinout must match for board-level interchangeability; different package types require layout changes and cannot be directly swapped. |
| Typical Power Consumption | Low power (approx. 1.5 mW at 100 kSPS, 5 V) | Higher power (approx. 190 mW at 60 MSPS, 5 V) | Power budget constrains portable and thermally sensitive designs; the low-power SAR part suits battery systems, while the high-speed pipeline part draws substantially more current. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS830EG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 8 |
| Sampling Rate(Per Second) | 100k | 60M |
| Number of Inputs | 4, 8 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | Pipelined |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation register (SAR) analog-to-digital converter with a maximum sampling rate of 100 kSPS, while the ADS830EG4 is an 8-bit, single-channel pipeline ADC with a maximum sampling rate of 60 MSPS. They differ fundamentally in resolution, architecture, channel count, and speed.
The ADS8345E/2K5 operates from a single 2.7 V to 5.25 V analog and digital supply. The ADS830EG4 requires a 5 V analog supply and a separate 3 V to 5 V digital output supply.
The ADS8345E/2K5 supports eight single-ended inputs or four differential inputs, selectable via its input multiplexer. The ADS830EG4 provides a single-ended analog input with an internal reference and a flexible input range.
The ADS8345E/2K5 uses a serial SPI-compatible interface. The ADS830EG4 provides a parallel CMOS-compatible output bus for its 8-bit conversion results.
No. The ADS8345E/2K5 is supplied in a 20-pin SSOP package, while the ADS830EG4 is supplied in a 20-pin TSSOP package. Pin functions and PCB land patterns differ, so they are not direct drop-in replacements.
The ADS8345E/2K5 is suited to multi-channel, medium-speed data acquisition such as industrial process control and portable instrumentation. The ADS830EG4 is intended for high-speed, single-channel signal digitization such as video processing, imaging, and communications receivers.
Both the ADS8345E/2K5 and the ADS830EG4 are specified for the industrial temperature range of -40°C to +85°C.