ADS8345E/2K5
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 3595 PCS
- Package
- SSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS8345E/2K5과 ADS8343EB/2K5에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS8343EB/2K5 is a viable functional replacement candidate for the ADS8345E/2K5 in many designs, as both are 16-bit SAR ADCs with similar resolution and reference architecture. However, the ADS8343EB offers a lower maximum sampling rate and a reduced input channel count, so the substitution requires validation against the system's throughput and multiplexing requirements before adoption.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS8343EB/2K5 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability. |
| Number of Input Channels | 8 single-ended / 4 differential | 4 single-ended / 2 differential | Channel count determines how many signals can be multiplexed into one ADC; the ADS8345 supports twice as many inputs. |
| Sampling Rate | 100 kSPS | 100 kSPS | Throughput is the same, so timing and bandwidth requirements are compatible between the two parts. |
| Supply Voltage (Analog and Digital) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Identical supply range means either device can drop into the same power rail design. |
| Interface | SPI-compatible serial (SPI/QSPI/Microwire) | SPI-compatible serial (SPI/QSPI/Microwire) | Same serial interface protocol allows reuse of the same digital host and firmware. |
| Input Type | Single-ended or differential (software selectable) | Single-ended or differential (software selectable) | Both support flexible input configurations, so signal conditioning can remain unchanged. |
| Package | 20-pin SSOP (DBQ) | 16-pin SSOP (DBQ) | Different pin counts and footprints mean the PCB layout must be redesigned; they are not drop-in replacements. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings ensure equivalent environmental robustness. |
| Reference Input | External reference | External reference | Both require an external voltage reference, so the reference circuit can be shared across designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS8343EB/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 4, 8 | 2, 4 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation ADC with a serial interface, while the ADS8343EB/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial interface. The primary differences are channel count (8 vs 4) and package type (SSOP-20 for the ADS8345E vs SSOP-16 for the ADS8343EB). Both operate from a single +2.7V to +5V supply and offer similar sampling rates.
No. The ADS8345E/2K5 is supplied in a 20-pin SSOP package, while the ADS8343EB/2K5 is supplied in a 16-pin SSOP package. The different pin counts and pin assignments mean they are not drop-in replacements for each other and require different PCB footprints.
Both the ADS8345E/2K5 and ADS8343EB/2K5 are 16-bit successive-approximation analog-to-digital converters. The ADS8345 offers a sampling rate of up to 100 kSPS, and the ADS8343 offers a sampling rate of up to 100 kSPS, per the respective Texas Instruments datasheets.
The ADS8345E/2K5 provides 8 single-ended inputs or 4 differential input pairs. The ADS8343EB/2K5 provides 4 single-ended inputs or 2 differential input pairs. Both devices support software-selectable input configurations via their serial interface.
Both devices operate from a single analog supply of +2.7V to +5V. They also feature a separate digital supply pin (VIO) that allows the digital interface to operate from +2.7V to +5V, enabling direct connection to lower-voltage logic.
Both the ADS8345E/2K5 and ADS8343EB/2K5 use a SPI-compatible serial interface with CS, DIN, DOUT, and DCLK signals. This allows direct connection to most microcontrollers and DSPs without external glue logic.
These 16-bit SAR ADCs are typically used in industrial process control, data acquisition systems, battery-powered instruments, medical instrumentation, and portable measurement equipment where moderate speed and high resolution are required.
Both the ADS8345E/2K5 and ADS8343EB/2K5 are specified for the industrial temperature range of -40°C to +85°C, as stated in the Texas Instruments datasheets.