ADS8345E/2K5
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 3595 PCS
- Package
- SSOP-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS8345E/2K5과 ADS831E/2K5G4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS8345E/2K5 and ADS831E/2K5G4 are not drop-in replacements for one another. The ADS8345E/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial interface, while the ADS831E/2K5G4 is an 8-bit, 1-channel pipeline ADC with a parallel interface. They differ in resolution, channel count, output interface, and package, so a direct substitution is not feasible without a full system redesign.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS831E/2K5G4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 16 | 8 | Resolution determines the smallest measurable signal step; a 16-bit ADC offers far finer quantization than an 8-bit ADC, so these parts are not functionally interchangeable in precision applications. |
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 1 (single-ended) | Channel count defines how many signals can be digitized; the multi-channel ADS8345 can multiplex several inputs while the single-channel ADS831 cannot, affecting system architecture. |
| Sampling Rate (max) | 100 kSPS | 20 MSPS | Maximum sample rate sets the bandwidth of signals that can be captured; the ADS831 is far faster, making it suitable for high-speed acquisition where the ADS8345 would be too slow. |
| Input Type | Single-ended / Pseudo-differential | Single-ended | Differential input capability improves noise immunity and common-mode rejection; the ADS8345 supports differential configurations while the ADS831 does not. |
| Interface | SPI / Serial | Parallel | The digital interface must match the host controller; a serial SPI device and a parallel-output device require different board routing and firmware, preventing drop-in substitution. |
| Supply Voltage | 2.7 V to 5.25 V | 5 V (single supply) | Supply range determines compatibility with the system power rail; the wider-range ADS8345 can operate at lower voltages that the 5 V ADS831 cannot support. |
| Package | 20-pin SSOP | 20-pin SSOP | Package footprint affects PCB layout and assembly; matching packages ease board-level replacement even when electrical characteristics differ. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range must cover the application environment; identical industrial ranges mean both parts suit the same thermal conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS831E/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 8 |
| Sampling Rate(Per Second) | 100k | 80M |
| Number of Inputs | 4, 8 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | Pipelined |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation ADC with a serial interface, operating from a 2.7 V to 5 V supply, offered in a 20-pin SSOP package and supplied on a 2,500-unit reel. The ADS831E/2K5G4 is an 8-bit, 1 MSPS sampling ADC with a parallel interface, operating from a 5 V supply, offered in a 20-pin SSOP package and supplied on a 2,500-unit reel. They differ in resolution, channel count, interface type, and supply requirements.
No. Although both devices are offered in a 20-pin SSOP package, their pin functions differ because the ADS8345E provides a serial interface with 8 input channels, while the ADS831E provides a parallel interface with a single sampling input. Pin assignments and signal functions are not interchangeable, so the PCB layout must be designed specifically for each device.
No. The ADS831E/2K5G4 is an 8-bit device with a parallel interface and a 5 V supply, whereas the ADS8345E/2K5 is a 16-bit device with a serial interface and a 2.7 V to 5 V supply range. Resolution, interface, channel count, and supply requirements differ, so a direct replacement is not possible without redesigning the interface and validating system performance.
The ADS8345E/2K5 provides 16-bit resolution with 8 input channels and a successive-approximation architecture. The ADS831E/2K5G4 provides 8-bit resolution with a 1 MSPS sampling rate and a single sampling input. These differences make the ADS8345E/2K5 suitable for higher-resolution multi-channel applications, while the ADS831E/2K5G4 targets higher-speed, lower-resolution sampling.
The ADS8345E/2K5 operates from a 2.7 V to 5 V supply and uses a serial interface. The ADS831E/2K5G4 operates from a 5 V supply and uses a parallel interface. Designs must account for these supply and interface differences when selecting or replacing either device.
Both devices are offered in a 20-pin SSOP package. The ADS8345E/2K5 and ADS831E/2K5G4 suffixes indicate 2,500-unit tape-and-reel packaging. The G4 suffix on the ADS831E/2K5G4 denotes a green (RoHS-compliant) package option per Texas Instruments ordering conventions. Designers should confirm the exact package and ordering code against the respective manufacturer datasheet before production release.
The ADS8345E/2K5 is better suited for multi-channel, high-resolution data acquisition because it provides 16-bit resolution and 8 input channels with a serial interface. The ADS831E/2K5G4, with 8-bit resolution and a single sampling input, is intended for higher-speed, lower-resolution applications.
The ADS831E/2K5G4 is better suited for high-speed sampling because it provides a 1 MSPS sampling rate with a parallel interface. The ADS8345E/2K5, with its 16-bit successive-approximation architecture and serial interface, is oriented toward higher-resolution, multi-channel measurements rather than high-speed sampling.