AFE58JD28ZAV vs AFE5804ZCF

AFE58JD28ZAV과 AFE5804ZCF에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AFE58JD28ZAV and AFE5804ZCF are not drop-in replacements for one another. The AFE58JD28ZAV is a 16-channel ultrasound analog front end with integrated JESD204B serial output, digital demodulation, and CW Doppler processing, while the AFE5804ZCF is an 8-channel device with LVDS serial output and a different package and channel count. Designers must account for differences in channel count, digital interface, package footprint, and functional feature set before considering substitution.

Different channel count Different output interface Different package footprint Different feature set

Parts at a glance

Part A

AFE58JD28ZAV

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
7063 PCS
Package
NFBGA-289
Series
데이터 수집 - 아날로그 프런트엔드(AFE)
Part B

AFE5804ZCF

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
2032 PCS
Package
BGA-135
Series
데이터 수집 - 아날로그 프런트엔드(AFE)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AFE58JD28ZAV AFE5804ZCF Why it matters
Number of Channels 16 8 Channel count determines how many transducer elements can be processed simultaneously, directly affecting imaging system architecture and channel-count compatibility.
ADC Resolution 14 bit 12 bit Higher ADC resolution provides greater dynamic range and finer signal quantization, which impacts image quality and small-signal detection.
Maximum Sampling Rate 65 MSPS 40 MSPS Sampling rate limits the maximum signal bandwidth and achievable axial resolution, so a lower-rate device may not support the same imaging modes.
Input Clock Frequency Up to 65 MHz Up to 40 MHz The clock frequency bounds the ADC conversion rate and must match the system timing to achieve the intended sample rate.
Output Interface JESD204B serial (LVDS) LVDS serial The digital output interface must be compatible with the downstream FPGA or receiver; JESD204B and LVDS are not directly interchangeable without rework.
Package NFBGA (ZAV) NFBGA (ZCF) Package footprint and pinout determine PCB layout compatibility; differing packages generally require a board redesign for substitution.
Supply Voltage 1.8 V / 3.3 V (multiple rails) 1.8 V / 3.3 V (multiple rails) Supply rail requirements affect power delivery design; similar rails ease substitution but exact sequencing and tolerances must still be verified.
Integrated CW Doppler / Demodulation Yes (digital demodulation and CW support) Yes (CW Doppler support) Continuous-wave Doppler capability is essential for blood-flow measurement; differences in demodulation architecture affect system-level Doppler processing.
Typical Application High-channel-count ultrasound systems Mid-range ultrasound systems The intended application class indicates the performance tier and helps assess whether the device meets the target system's imaging requirements.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AFE58JD28ZAV AFE5804ZCF
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Active
Number of Bits 12, 14 12
Number of Channels 16 8
Power (Watts) 64 mW 101 mW
Voltage - Supply, Analog 3.15V ~ 3.6V 3.15V ~ 3.47V, 5V
Voltage - Supply, Digital - 1.7V ~ 1.9V
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the AFE58JD28ZAV and AFE5804ZCF?

The AFE58JD28ZAV is an 8-channel ultrasound analog front end (AFE) with a 14-bit ADC, JESD204B serial output, and integrated digital demodulation, while the AFE5804ZCF is an 8-channel AFE with a 12-bit ADC and LVDS parallel output. The AFE58JD28ZAV targets higher-channel-count, high-speed digital ultrasound systems, whereas the AFE5804ZCF suits legacy LVDS-based architectures.

Are the AFE58JD28ZAV and AFE5804ZCF pin-to-pin compatible?

No. The AFE58JD28ZAV is supplied in a 289-ball NFBGA package, and the AFE5804ZCF is supplied in a 100-pin TQFP package. The package types, pin counts, and pin functions differ, so they are not drop-in replacements and require separate PCB layouts.

What are the ADC resolutions and output interfaces of each device?

The AFE58JD28ZAV integrates a 14-bit ADC with a JESD204B serial output interface. The AFE5804ZCF integrates a 12-bit ADC with an LVDS output interface. The higher resolution and serialized JESD204B output of the AFE58JD28ZAV reduce FPGA I/O count in dense systems.

Do both devices support the same number of ultrasound channels?

Yes. Both the AFE58JD28ZAV and AFE5804ZCF are 8-channel ultrasound AFEs, each integrating eight receive channels with low-noise amplifiers, variable-gain amplifiers, and anti-aliasing filters ahead of the ADC.

Which device is better suited for a new high-channel-count ultrasound design?

The AFE58JD28ZAV is generally preferred for new high-channel-count designs because its JESD204B serial output reduces FPGA pin count and routing complexity compared with the LVDS parallel output of the AFE5804ZCF. The 14-bit ADC also provides higher dynamic range. Selection should still be validated against the system's power, clocking, and FPGA interface requirements.

Can the AFE5804ZCF be used as a direct replacement for the AFE58JD28ZAV in an existing design?

No. Because the packages, pin counts, ADC resolution, and output interfaces differ, the AFE5804ZCF cannot directly replace the AFE58JD28ZAV. A redesign of the PCB, FPGA interface, and clocking scheme would be required, and the change must be validated against the manufacturer datasheets.

What are the supply and integration considerations when comparing these two AFEs?

Both devices require analog and digital supply rails and external clocking, but the AFE58JD28ZAV adds JESD204B serial link requirements, including a compatible FPGA transceiver and reference clock, while the AFE5804ZCF requires LVDS receiver pins on the FPGA. Power consumption, channel density, and FPGA I/O budget should be compared using the respective manufacturer datasheets before selection.