AMC1300DWVR vs AMC1305M25DWR

AMC1300DWVR과 AMC1305M25DWR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AMC1305M25DWR and AMC1300DWVR are both isolated delta-sigma modulator families from Texas Instruments sharing a 16-pin SOIC-wide footprint and 5 V supply architecture, but they differ in input structure, isolation rating, and output format. The AMC1305M25DWR is a ±250 mV input, reinforced-isolation modulator with a single-ended CMOS output, while the AMC1300DWVR is a ±250 mV input, basic-isolation amplifier with a differential output. Designers should validate isolation requirements, output interface compatibility, and clocking before substituting one for the other in a given application.

Input Voltage Range Validation required
Output Type Not compatible
Isolation Rating Validation required
Package Type High match

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1305M25DWR AMC1300DWVR Why it matters
Input Type Current shunt (isolated delta-sigma modulator) Voltage (isolated amplifier) Determines whether the device measures current via a shunt or amplifies a voltage signal, which fundamentally changes the sensing circuit topology.
Output Format 1-bit digital bitstream (delta-sigma) Analog differential voltage A digital bitstream requires an external digital filter/decoder, while an analog output feeds an ADC directly; they are not drop-in interchangeable.
Isolation Rating 5000 V RMS (reinforced) 5000 V RMS (reinforced) Both provide reinforced isolation, but confirming the rating ensures safety compliance for high-voltage measurement applications.
Input Voltage Range ±250 mV (shunt input) ±250 mV (linear input range) Defines the maximum signal swing the device can accept; matching this to the sensor output prevents clipping or loss of resolution.
Supply Voltage 3.3 V or 5 V (both sides) 3.3 V or 5 V (both sides) Compatible supply rails simplify power design, but the digital vs analog nature still affects the surrounding circuitry.
Package SOIC-16 (wide body) SOIC-8 (wide body) Different pin counts and footprints mean the PCB layout must be redesigned; they are not footprint-compatible.
Operating Temperature -40°C to +125°C -40°C to +125°C Both support industrial temperature ranges, suitable for harsh environments.
Gain / Sensitivity Fixed modulator gain (bitstream density proportional to input) Fixed gain of 8.2 (analog output) The transfer characteristic differs fundamentally; system calibration and signal chain design depend on this behavior.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1300DWVR AMC1305M25DWR
Part Status Active Active
Type Isolation Isolated Module
Applications Current Sensing, Power Management -
Mounting Type Surface Mount Surface Mount
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) - 78k
Data Interface - CMOS, Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 3V ~ 5.5V
Operating Temperature - -40°C ~ 125°C

Frequently asked questions

What are the primary functional differences between the AMC1305M25DWR and the AMC1300DWVR?

The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range and a fixed 20-MHz clock, designed for shunt-based current sensing with direct digital output. The AMC1300DWVR is a reinforced isolated amplifier with a ±250-mV input range and a differential analog output, intended for use with an external ADC. The key difference is the output type: the AMC1305M25DWR provides a 1-bit delta-sigma bitstream, while the AMC1300DWVR provides an analog differential signal.

Are the AMC1305M25DWR and AMC1300DWVR pin-to-pin compatible?

No. Both devices are offered in a 16-pin SOIC (DWR) package, but their pin functions differ because one outputs a delta-sigma bitstream and the other outputs an analog differential signal. The AMC1305M25DWR uses pins for the modulator clock input and data output, whereas the AMC1300DWVR uses pins for analog output and output common-mode. They are not direct pin-to-pin replacements.

Do both devices provide reinforced isolation, and what is the isolation rating?

Yes. Both the AMC1305M25DWR and AMC1300DWVR are reinforced isolated devices rated for 5-kV RMS isolation per UL 1577 and 7.07-kV peak per VDE V 0884-10 (VDE 0884-10). Both support a maximum working isolation voltage of 1.5-kV peak per VDE and a transient overvoltage of 12.5-kV peak.

What input voltage range do the AMC1305M25DWR and AMC1300DWVR support?

Both devices are specified for a linear input range of ±250 mV, making them suitable for shunt-resistor-based current sensing in motor drive and inverter applications. The input common-mode range and offset specifications differ slightly between the two datasheets and should be verified against the respective manufacturer datasheet for the target design.

Which device should be selected for a design that uses an external ADC?

The AMC1300DWVR is the appropriate choice when an external ADC is used, because it provides a differential analog output that can be sampled by a separate ADC. The AMC1305M25DWR integrates a delta-sigma modulator and outputs a 1-bit bitstream, so it requires a digital filter or a microcontroller with a delta-sigma demodulator rather than an external ADC.

What are the supply voltage requirements for the AMC1305M25DWR and AMC1300DWVR?

Both devices use a dual-supply arrangement with a high-side supply (VDD1) and a low-side supply (VDD2). The AMC1305M25DWR operates with VDD1 at 3.0 V to 5.5 V and VDD2 at 3.0 V to 5.5 V. The AMC1300DWVR operates with VDD1 at 3.0 V to 5.5 V and VDD2 at 3.0 V to 5.5 V. Exact recommended operating conditions should be confirmed in the respective datasheets.

Can the AMC1305M25DWR and AMC1300DWVR be used in the same motor-drive current-sensing application?

Yes, both are intended for isolated shunt-based current sensing in motor drives and inverters. The selection depends on the downstream signal chain: the AMC1305M25DWR suits designs with a delta-sigma demodulator or digital filter, while the AMC1300DWVR suits designs that feed an external ADC. The isolation ratings and ±250-mV input range are common to both.

What is the fixed modulator clock frequency of the AMC1305M25DWR, and does the AMC1300DWVR have an equivalent clock requirement?

The AMC1305M25DWR is specified with a 20-MHz modulator clock (CLKIN) that drives the delta-sigma modulator. The AMC1300DWVR is an analog-output isolated amplifier and does not require a modulator clock; its signal path is continuous-time analog. This is a fundamental architectural difference between the two devices.