AMC1305M25DWR vs AMC1302DWV

AMC1305M25DWR과 AMC1302DWV에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AMC1305M25DWR and AMC1302DWV are both isolated delta-sigma modulator amplifiers, but they differ fundamentally in input architecture, isolation performance, and package footprint, so neither part can directly substitute for the other without a full circuit and layout redesign.

Different input architecture Different isolation rating Different package footprint Different output interface

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1305M25DWR AMC1302DWV Why it matters
Input Type Current shunt (isolated delta-sigma modulator for shunt resistor) Isolated amplifier (voltage input) The two parts measure fundamentally different signal types; one is a modulator for current sensing via a shunt, the other is an isolated amplifier for voltage sensing, so they are not functionally interchangeable.
Output Format 1-bit delta-sigma bitstream (digital) Differential analog voltage A digital bitstream output requires an external digital filter/decoder, while an analog output feeds an ADC directly; the downstream signal chain differs completely.
Isolation Rating 5000 V RMS (reinforced) 5000 V RMS (reinforced) Both provide reinforced isolation suitable for high-voltage sensing, so isolation capability is comparable and not a differentiator.
Input Voltage Range ±250 mV (shunt input) ±50 mV (with gain, voltage input) The input range determines the shunt or voltage divider design; the modulator accepts a larger shunt signal while the amplifier targets small differential voltages.
Gain Fixed modulator gain (bitstream density proportional to input) Fixed gain of 41 The amplifier provides a defined analog gain, whereas the modulator encodes the input as bitstream density; scaling behavior in the system differs.
Supply Voltage 3.3 V or 5 V (high side), 3.3 V or 5 V (low side) 3.3 V or 5 V (high side), 3.3 V or 5 V (low side) Both support common 3.3 V and 5 V rails on either side of the isolation barrier, so supply compatibility is similar.
Package SOIC-16 (wide body) SOIC-8 (wide body) Different package footprints and pin counts mean the PCB layout cannot be shared without redesign.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Both cover the industrial temperature range, so thermal suitability is equivalent.
Typical Application Motor drive current sensing, shunt-based current measurement Voltage sensing, isolated signal conditioning The intended use cases differ, confirming they serve different roles in a system rather than being drop-in substitutes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1305M25DWR AMC1302DWV
Supplier - Texas Instruments
Part Status Active Active
Type Isolated Module Isolation
Applications - Current Sensing, Power Management
Mounting Type Surface Mount Surface Mount
Number of Channels 1 -
Resolution(Bits) 16 b -
Sampling Rate(Per Second) 78k -
Data Interface CMOS, Serial -
Voltage Supply Source Analog and Digital -
Voltage - Supply 3V ~ 5.5V -
Operating Temperature -40°C ~ 125°C -

Frequently asked questions

What are the primary functional differences between the AMC1305M25DWR and the AMC1302DWV?

The AMC1305M25DWR is a precision, isolated delta-sigma modulator with a ±250 mV input range and a 20 MHz clock, designed for direct shunt-resistor current sensing. The AMC1302DWV is an isolated amplifier with a ±50 mV input range and a fixed gain of 41, intended for shunt-based current measurement with a differential output. The modulator outputs a 1-bit data stream, while the amplifier outputs an analog differential voltage.

Are the AMC1305M25DWR and AMC1302DWV pin-to-pin compatible?

No. The AMC1305M25DWR is supplied in an 8-pin SOIC (DWR) package, while the AMC1302DWV is supplied in an 8-pin SOIC (DWV) package. Although both are 8-pin SOIC devices, the pin functions differ: the AMC1305M25DWR provides a modulator clock input and a 1-bit data output, whereas the AMC1302DWV provides a differential analog output and does not require an external clock. They are not direct drop-in replacements.

What are the input voltage ranges of the AMC1305M25DWR and AMC1302DWV?

The AMC1305M25DWR has a specified input range of ±250 mV, suitable for shunt resistors producing a 250 mV full-scale drop. The AMC1302DWV has a specified input range of ±50 mV, making it appropriate for lower-value shunt resistors or lower current ranges. The input range difference directly affects the shunt resistor selection and the achievable measurement resolution.

Do both devices provide galvanic isolation, and what is the isolation rating?

Yes, both the AMC1305M25DWR and AMC1302DWV are reinforced isolated devices. Both are rated for a maximum isolation working voltage of 1500 VRMS and a transient overvoltage of 7000 VPK per the manufacturer's datasheet, and both are qualified to UL 1577 and VDE 0884-10 standards. The isolation barrier is a core feature of both parts for high-voltage current sensing applications.

Which device is better suited for a design that requires a digital output to an MCU?

The AMC1305M25DWR is the appropriate choice when a digital output is required, because it is a delta-sigma modulator that outputs a 1-bit data stream at a 20 MHz clock rate, which can be processed by an MCU or FPGA digital filter. The AMC1302DWV provides an analog differential output and would require an external ADC to interface with an MCU. The selection depends on whether the system architecture uses a digital isolator/modulator path or an analog isolation amplifier followed by an ADC.

What are the typical supply voltage requirements for the AMC1305M25DWR and AMC1302DWV?

Both devices operate from a 5 V supply on the high-side (isolated) side and a 3.3 V or 5 V supply on the low-side (controller) side, per the manufacturer datasheet. The AMC1305M25DWR requires a 5 V high-side supply and a 3.3 V or 5 V low-side supply, while the AMC1302DWV similarly uses a 5 V high-side supply and a 3.3 V or 5 V low-side supply. Designers should verify the exact recommended operating conditions in the respective datasheets for the target application.

Can the AMC1302DWV replace the AMC1305M25DWR in an existing design without changes?

No. Because the AMC1305M25DWR outputs a 1-bit modulator data stream and requires an external clock, while the AMC1302DWV outputs an analog differential voltage, the downstream signal chain (digital filter, ADC, or MCU interface) differs fundamentally. Additionally, the input ranges differ (±250 mV versus ±50 mV), so the shunt resistor and signal scaling would need to be recalculated. A direct replacement is not possible without redesigning the signal path and validating the new configuration.

What are the typical applications for each device?

The AMC1305M25DWR is typically used in motor drive current sensing, inverter phase current measurement, and industrial power supplies where a digital modulator output is preferred for isolation and noise immunity. The AMC1302DWV is typically used in shunt-based current sensing in motor control, solar inverters, and battery management systems where an analog isolated amplifier output is required. Both target high-voltage, isolated current-sensing applications but differ in output format and input range.