AD5252BRUZ1-RL7
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 6830 PCS
- Package
- TSSOP-14
- Series
- 데이터 수집 - 디지털 전위기
AD5252BRUZ1-RL7과 AD5253BRU1에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD5252BRUZ1-RL7 and AD5253BRU1 are both dual-channel digital potentiometers from the same AD525x family, sharing a 256-position resolution, I²C interface, and TSSOP-14 footprint. However, they differ in nonvolatile memory architecture and end-to-end resistance options, so the AD5253BRU1 can serve as a functional substitute only after validating the memory behavior and resistance value required by the target design.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1-RL7 | AD5253BRU1 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the resolution of resistance adjustment; a 256-position device offers finer wiper granularity than a 64-position device. |
| Number of Resistors | 2 | 4 | Indicates how many independent potentiometer channels are available in a single package, affecting channel count in a design. |
| Nominal Resistance | 1 kOhm | 10 kOhm | Sets the end-to-end resistance of the potentiometer, which must match the impedance requirements of the surrounding circuit. |
| Interface Type | I2C | SPI | Determines the digital communication protocol required by the host controller, affecting pin count and firmware compatibility. |
| Package / Case | 14-TSSOP | 20-TSSOP | Affects PCB footprint and layout; a different package size means the board must be redesigned for substitution. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the operating voltage window; both parts share the same range, allowing use in similar power domains. |
| Nonvolatile Memory | Yes (EEPROM) | Yes (EEPROM) | Determines whether the wiper setting is retained after power loss, which is critical for calibration and startup behavior. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | Specifies the environmental conditions under which the device is guaranteed to operate reliably. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1-RL7 | AD5253BRU1 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 4 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 1k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±30% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1-RL7 is a dual-channel, 256-position digital potentiometer (2-channel, 8-bit), while the AD5253BRU1 is a quad-channel, 64-position digital potentiometer (4-channel, 6-bit). The AD5252 offers higher resolution per channel, whereas the AD5253 provides more channels with lower resolution. Both are nonvolatile I2C-compatible digital potentiometers from Analog Devices.
No. The AD5252 is a 14-lead TSSOP (RU-14 package), and the AD5253 is a 20-lead TSSOP (RU-20 package). They have different pin counts and pinouts, so they are not drop-in replacements for each other.
The AD5252BRUZ1-RL7 has two channels with 256 positions each (8-bit resolution). The AD5253BRU1 has four channels with 64 positions each (6-bit resolution).
Yes. Both the AD5252 and AD5253 use a 2-wire I2C-compatible serial interface for programming and reading back the wiper settings.
The AD5252BRUZ1-RL7 is available in 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ end-to-end resistance options. The AD5253BRU1 is available in 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ options as well. The specific resistance value is indicated by the part number suffix; for example, the "1" in AD5252BRUZ1-RL7 typically denotes a 1 kΩ option, and the "1" in AD5253BRU1 also denotes a 1 kΩ option. Verify the exact resistance code in the respective datasheets.
Yes. Both devices are nonvolatile digital potentiometers, meaning they retain the wiper setting after power is removed without requiring a backup supply.
The AD5252BRUZ1-RL7 is suited for applications requiring two channels of higher-resolution digital potentiometer adjustment, such as gain control, offset trimming, and programmable filters. The AD5253BRU1 is suited for applications needing four channels of lower-resolution adjustment, such as multi-channel bias control, LED brightness trimming, and sensor calibration.
No. The devices differ in channel count, resolution, package size, and pinout. A direct substitution would require PCB redesign and firmware changes to accommodate the different number of channels and position counts. Always validate against the manufacturer datasheets before considering any substitution.