ADS7809UB vs ADS7800KU/1K

ADS7809UB과 ADS7800KU/1K에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7809UB and ADS7800KU/1K are both 12-bit successive-approximation ADCs, but they differ in resolution architecture, package footprint, and interface timing, so the ADS7800KU/1K cannot be used as a direct drop-in substitute for the ADS7809UB without design changes and revalidation.

Different package footprint Different interface timing Different reference architecture Different throughput rating

Parts at a glance

Part A

ADS7809UB

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4394 PCS
Package
SOIC-20
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS7800KU/1K

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
780 PCS
Package
SOIC-24
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7800KU/1K Why it matters
Resolution 16 bit 12 bit Resolution determines the smallest analog increment the ADC can distinguish; a 16-bit part offers 16x finer quantization than a 12-bit part, so they are not functionally interchangeable in precision applications.
Sampling Rate 100 kSPS 333 kSPS Maximum throughput limits the bandwidth of signals that can be digitized; the ADS7800 supports faster sampling, which matters for higher-frequency or multiplexed acquisition systems.
Input Type Single-ended Single-ended Input configuration affects how the signal source must be connected and whether differential rejection is available; both are single-ended here, but this must be confirmed for drop-in compatibility.
Supply Voltage 5 V (single supply) 5 V and -5 V (dual supply) Supply requirements dictate board-level power design; the ADS7800 needs a negative rail while the ADS7809 runs from a single 5 V supply, so power architecture must change for substitution.
Interface Serial (SPI/QSPI compatible) Parallel The digital interface determines how the converter connects to the host processor; serial versus parallel output requires different pin count, timing, and firmware, preventing direct drop-in replacement.
Package SOIC-28 SOIC-24 Package footprint and pin count must match for PCB compatibility; differing package sizes mean the parts cannot share the same land pattern.
Integral Nonlinearity (INL) ±1.5 LSB (max) ±0.5 LSB (max) INL describes deviation from an ideal transfer function and directly affects accuracy; the tighter INL of the ADS7800 in its own resolution class reflects different precision grades between the two parts.
Operating Temperature Range -40 °C to +85 °C 0 °C to +70 °C Temperature range determines suitability for industrial versus commercial environments; the wider range of the ADS7809 allows use in harsher conditions where the ADS7800 grade would not be specified.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7800KU/1K
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 16 12
Sampling Rate(Per Second) 100k 333k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal Internal
Voltage - Supply, Analog 5V 5V, -11.4V ~ 16.5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key architectural differences between the ADS7809UB and the ADS7800KU/1K?

The ADS7809UB is a 16-bit successive-approximation register (SAR) analog-to-digital converter with a serial data interface, while the ADS7800KU/1K is a 12-bit SAR ADC that provides a parallel data interface. The ADS7809UB offers higher resolution (16 bits versus 12 bits) and a different digital communication scheme, making them non-interchangeable in terms of data bus architecture.

Do the ADS7809UB and ADS7800KU/1K have the same package and pinout?

No. The ADS7809UB is supplied in a 28-pin SOIC package, whereas the ADS7800KU/1K is supplied in a 24-pin PDIP or SOIC package depending on the grade. The pin counts and pin functions differ, so PCB land patterns and socket compatibility are not interchangeable between the two devices.

Can the ADS7809UB and ADS7800KU/1K operate from the same analog supply voltage?

Both devices are specified for a +5 V analog supply. However, the ADS7809UB includes an internal reference and operates with a 5 V supply for both analog and digital sections, while the ADS7800KU/1K also uses a +5 V supply but requires attention to its reference and input range configuration. Always confirm the exact supply and reference requirements from the respective datasheets before designing a common rail.

How do the sampling rates of the ADS7809UB and ADS7800KU/1K compare?

The ADS7809UB provides a maximum throughput of 100 kSPS. The ADS7800KU/1K is specified for a maximum throughput of 333 kSPS. Therefore, the ADS7800KU/1K offers a higher sampling rate but at 12-bit resolution, while the ADS7809UB trades speed for 16-bit resolution.

What are the input voltage ranges for the ADS7809UB and ADS7800KU/1K?

The ADS7809UB supports software-selectable input ranges of ±10 V, ±5 V, 0 V to 10 V, and 0 V to 5 V. The ADS7800KU/1K provides a fixed input range of ±10 V. Designs requiring flexible input ranges should account for this difference when considering either part.

Are the digital interfaces of the ADS7809UB and ADS7800KU/1K compatible with the same microcontroller?

Not directly. The ADS7809UB uses a serial interface (SPI/QSPI-compatible) for data output, while the ADS7800KU/1K provides a 12-bit parallel output with associated control lines. A microcontroller or FPGA design must be adapted to the respective interface type; a simple drop-in replacement is not possible without interface logic changes.

Do both the ADS7809UB and ADS7800KU/1K include an internal voltage reference?

Yes. Both the ADS7809UB and the ADS7800KU/1K integrate an internal reference voltage, reducing external component count. However, the reference specifications, drift, and initial accuracy should be verified in the respective datasheets for precision-critical applications.

What are the operating temperature ranges for the ADS7809UB and ADS7800KU/1K?

The ADS7809UB is specified over the industrial temperature range of −40 °C to +85 °C. The ADS7800KU/1K is specified over the commercial temperature range of 0 °C to +70 °C. Designs requiring extended temperature operation should favor the ADS7809UB or verify the exact grade suffix of the ADS7800 variant.