ADS7809UB vs ADS7804UB/1K

ADS7809UB과 ADS7804UB/1K에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7804UB/1K is a strong functional replacement candidate for the ADS7809UB, sharing the same 12-bit SAR architecture, 5 V supply, and 28-pin SOIC footprint. Designers should validate the serial interface configuration and confirm timing margins against the ADS7809UB's faster throughput before committing to production.

Resolution and Architecture High match
Package and Pinout High match
Sampling Rate Validation required
Digital Interface Validation required

Parts at a glance

Part A

ADS7809UB

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4394 PCS
Package
SOIC-20
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS7804UB/1K

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4479 PCS
Package
SOIC-28
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7804UB/1K Why it matters
Resolution 16 bit 12 bit Resolution determines the smallest signal change the ADC can distinguish; a 16-bit part offers 16x finer quantization than a 12-bit part, so they are not functionally interchangeable in precision applications.
Sampling Rate 100 kSPS 100 kSPS Throughput must meet the system's acquisition bandwidth; both parts share the same 100 kSPS maximum, so timing budgets are compatible.
Input Type Single-ended Single-ended Input configuration must match the sensor or signal chain topology; both accept single-ended inputs, simplifying direct substitution at the analog front end.
Supply Voltage 5 V 5 V Supply compatibility ensures the part can drop into an existing rail without level shifting or additional regulation.
Interface Parallel Parallel The digital interface must match the host controller's bus; both use a parallel interface, so board-level wiring and firmware access patterns remain compatible.
INL (Integral Nonlinearity) ±2 LSB (max) ±0.5 LSB (max) INL defines deviation from an ideal transfer function; the tighter INL spec of the 12-bit part reflects its lower resolution, and the absolute accuracy achievable differs significantly between the two.
Package 28-SOIC 28-SOIC Package and pinout must match for a physical drop-in replacement; both are 28-pin SOIC, allowing the same footprint on the PCB.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C The temperature range must cover the application environment; identical industrial ranges mean both parts suit the same operating conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7804UB/1K
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 16 12
Sampling Rate(Per Second) 100k 100k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809UB and the ADS7804UB/1K?

The ADS7809UB is a 16-bit successive-approximation analog-to-digital converter, while the ADS7804UB/1K is a 12-bit successive-approximation ADC. Both are pin-compatible members of the Burr-Brown (Texas Instruments) ADS780x family, but they differ in resolution, conversion time, and specified performance grades. The ADS7809UB offers 16-bit resolution with a 10 µs max conversion time, whereas the ADS7804UB provides 12-bit resolution with a 10 µs max conversion time. The "/1K" suffix on the ADS7804UB/1K denotes a tape-and-reel packaging quantity of 1,000 units.

Are the ADS7809UB and ADS7804UB/1K pin-compatible?

Yes. Both devices are members of the ADS780x family and share the same 28-pin package pinout, allowing them to be used in the same PCB footprint. However, because they differ in resolution and internal architecture, designers must verify that the system timing, digital interface, and accuracy requirements are satisfied when substituting one for the other.

What is the resolution and conversion time of each device?

The ADS7809UB provides 16-bit resolution with a maximum conversion time of 10 µs. The ADS7804UB/1K provides 12-bit resolution with a maximum conversion time of 10 µs. Both are successive-approximation register (SAR) ADCs with a parallel digital output interface.

What is the difference between the "UB" grade and other grades?

The "UB" suffix designates the industrial temperature range grade (−40°C to +85°C) in the specified package. The ADS7809UB and ADS7804UB/1K are both specified over the industrial temperature range. Designers should consult the respective datasheets for the exact grade-specific accuracy, linearity, and temperature specifications.

What does the "/1K" suffix on the ADS7804UB/1K mean?

The "/1K" suffix indicates tape-and-reel packaging with a quantity of 1,000 units per reel. It does not change the electrical or functional specifications of the ADS7804UB device; it is purely a packaging and ordering designation.

Can the ADS7804UB/1K be used as a drop-in replacement for the ADS7809UB in an existing design?

Because both devices are pin-compatible, the ADS7804UB/1K can be physically placed in the same socket. However, it is not a functional drop-in replacement: the ADS7804UB provides 12-bit resolution versus 16-bit for the ADS7809UB, so system accuracy and data format expectations must be revalidated. The digital interface timing and control signals should also be checked against the ADS7804 datasheet before substitution.

What are the typical applications for these ADCs?

Both the ADS7809UB and ADS7804UB/1K are suited for industrial process control, data acquisition systems, medical instrumentation, and test equipment where a parallel-interface SAR ADC with a 10 µs conversion time is required. The ADS7809UB is preferred where 16-bit resolution is needed, while the ADS7804UB/1K is appropriate for 12-bit applications.