ADS7809UB
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 4394 PCS
- Package
- SOIC-20
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
ADS7809UB과 ADS7805U/1KG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The ADS7809UB and ADS7805U/1KG4 are both 16-bit successive-approximation ADCs offering comparable resolution and sampling performance, making the ADS7805U/1KG4 a viable functional candidate for the ADS7809UB in many designs. However, the two devices differ in package and pinout, analog input configuration, and interface timing, so a direct drop-in substitution is not possible without layout and firmware validation.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809UB | ADS7805U/1KG4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit ADCs, so resolution is identical and not a differentiator for substitutability. |
| Sampling Rate | 100 kSPS | 100 kSPS | Throughput determines how fast the system can acquire signals; identical rates ease drop-in replacement. |
| Input Type | Single-ended | Single-ended | Input configuration must match the signal source topology; both being single-ended means the same front-end design applies. |
| Supply Voltage | 5 V (analog and digital) | 5 V (analog and digital) | Supply requirements dictate board-level power design; matching 5 V rails allow reuse of the same power circuitry. |
| Interface | Serial (SPI/QSPI compatible) | Parallel | The digital interface determines how the ADC connects to the host processor; serial vs parallel requires different pin routing and firmware. |
| Package | 28-pin SOIC | 28-pin SOIC | Package footprint must match for physical board compatibility; identical SOIC packages allow the same PCB land pattern. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Temperature range affects suitability for industrial environments; matching ranges mean equivalent environmental robustness. |
| Reference Type | Internal reference | Internal reference | On-chip reference simplifies design and reduces external components; both having internal references supports similar system architectures. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809UB | ADS7805U/1KG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -25°C ~ 85°C |
The ADS7809UB is a 16-bit successive-approximation ADC, while the ADS7805U/1KG4 is a 12-bit successive-approximation ADC. Both are pin-compatible members of the Burr-Brown (Texas Instruments) ADS78xx family, but they differ in resolution, linearity, and dynamic performance specifications. The ADS7809UB offers 16-bit resolution with ±2 LSB INL (max), whereas the ADS7805U/1KG4 offers 12-bit resolution with ±1 LSB INL (max).
Yes. Both devices are offered in the same 28-pin SOIC (DW) package and share the same pinout as members of the ADS780x family. This allows a common PCB footprint, but designers must verify that resolution-dependent timing and performance requirements are met before substituting one for the other.
Both the ADS7809UB and the ADS7805U/1KG4 are specified for a maximum throughput of 100 kSPS. The internal successive-approximation architecture and conversion timing are similar across the family, so the maximum sampling rate is the same for both parts.
Yes. Both devices provide a bipolar ±10 V analog input range using the internal reference and on-chip resistor network. The input configuration and reference architecture are common to the ADS780x family, so the analog front-end design can be shared between the two parts.
The ADS7809UB is a 16-bit converter with a maximum INL of ±2 LSB and no missing codes guaranteed to 16 bits. The ADS7805U/1KG4 is a 12-bit converter with a maximum INL of ±1 LSB and no missing codes guaranteed to 12 bits. The higher-resolution ADS7809UB therefore provides finer quantization and tighter absolute accuracy in terms of LSB, but its LSB size is 16 times smaller than that of the 12-bit device.
Yes. Both devices use the same parallel digital interface with identical control signals (CS, R/C, BYTE, and BUSY) and the same data bus width configuration. The interface timing is defined for the same 100 kSPS maximum throughput, so the same microcontroller or DSP interface logic can be used with either part.
Both the ADS7809UB and the ADS7805U/1KG4 operate from a single +5 V analog supply and a +5 V digital supply, with power consumption in the same family-typical range. Designers should consult the respective datasheets for exact quiescent current and power dissipation limits, which are specified separately for each device.
Because the two parts are pin-compatible and share the same interface and analog input range, the ADS7805U/1KG4 can physically populate the same footprint. However, it provides only 12-bit resolution versus 16 bits, so any design requiring 16-bit accuracy or no-missing-code performance at 16 bits cannot use the 12-bit device as a functional equivalent. The substitution must be validated against the system's resolution and accuracy requirements.