ADS7809UB vs ADS7804UE4

ADS7809UB과 ADS7804UE4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7809UB and ADS7804UE4 are both 12-bit successive-approximation ADCs from Texas Instruments with parallel output interfaces, making them functionally comparable in many designs. However, they differ in package footprint, conversion speed, and analog input configuration, so the ADS7804UE4 should be treated as a candidate replacement only after validating package compatibility, timing margins, and input signal conditioning against the target application requirements.

Resolution and Output Interface High match
Package Type Validation required
Conversion Speed Validation required
Analog Input Configuration Validation required

Parts at a glance

Part A

ADS7809UB

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4394 PCS
Package
SOIC-20
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

ADS7804UE4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
4392 PCS
Package
SOIC-28
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7804UE4 Why it matters
Resolution 16 bit 12 bit Resolution determines the smallest measurable signal step; a 16-bit ADC provides 16x finer quantization than a 12-bit ADC, so these parts are not functionally interchangeable in precision applications.
Sampling Rate 100 kSPS 100 kSPS Throughput must meet the system's acquisition bandwidth; both parts share the same 100 kSPS maximum, so timing budgets are compatible.
Input Type Single-ended Single-ended Input configuration must match the sensor or signal chain topology; both accept single-ended inputs, so front-end design is compatible.
Interface Serial (SPI/QSPI compatible) Parallel The digital interface dictates the host connection and PCB routing; serial vs parallel output means the two parts cannot be dropped into the same socket without redesign.
Supply Voltage 5 V 5 V Supply voltage must match the board's power rail; both operate from a single 5 V supply, so power design is compatible.
Reference Type Internal Internal An internal reference simplifies the design and reduces external components; both include an on-chip reference, so no external reference is required for either.
Package / Case 28-SOIC 28-SOIC Package footprint determines PCB layout compatibility; both use a 28-pin SOIC, so the land pattern is shared.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range must cover the application environment; both are rated for the industrial -40 °C to +85 °C range.
INL (Integral Nonlinearity) ±1.5 LSB (max) ±0.5 LSB (max) INL defines absolute accuracy deviation from an ideal transfer function; the tighter INL of the 12-bit part reflects its different resolution class and affects measurement accuracy budgets.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7804UE4
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Obsolete
Number of Bits 16 12
Sampling Rate(Per Second) 100k 100k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809UB and ADS7804UE4?

The ADS7809UB is a 16-bit successive-approximation ADC with a serial (SPI-compatible) interface, while the ADS7804UE4 is a 12-bit successive-approximation ADC with a parallel interface. The ADS7809UB offers higher resolution (16-bit vs 12-bit) and a serial output, whereas the ADS7804UE4 provides a parallel data bus. Both are single-channel, bipolar-input ADCs from Texas Instruments in a 28-pin SOIC package.

Do the ADS7809UB and ADS7804UE4 have the same pinout and package?

Both devices are offered in a 28-pin SOIC (DW) package, but their pin functions differ because the ADS7809UB uses a serial interface and the ADS7804UE4 uses a parallel interface. They are not pin-for-pin drop-in replacements; the digital interface pins and control signals differ, so PCB layout and firmware must be adapted accordingly.

What is the resolution and sampling rate of each device?

The ADS7809UB provides 16-bit resolution with a maximum sampling rate of 100 kSPS. The ADS7804UE4 provides 12-bit resolution with a maximum sampling rate of 100 kSPS. Both are successive-approximation register (SAR) ADCs with integrated sample-and-hold circuitry.

What input voltage range do these ADCs support?

Both the ADS7809UB and ADS7804UE4 feature bipolar input ranges of ±10 V, ±5 V, and 0 V to 5 V (software or pin selectable depending on configuration). The input range is configured via control pins, allowing flexibility for industrial signal acquisition.

What digital interfaces do the ADS7809UB and ADS7804UE4 use?

The ADS7809UB uses a serial interface compatible with SPI and similar synchronous serial protocols, outputting data on a single serial data line with frame synchronization. The ADS7804UE4 uses a parallel interface with a 12-bit-wide data bus plus control signals (CS, R/C, BYTE, etc.) for direct connection to parallel microcontrollers or DSPs.

Are the ADS7809UB and ADS7804UE4 interchangeable in an existing design?

No. Because the ADS7809UB is 16-bit with a serial interface and the ADS7804UE4 is 12-bit with a parallel interface, they are not directly interchangeable. A redesign of the digital interface, firmware, and possibly the analog front-end scaling is required. Substitution should only be attempted after validating all specifications against the Texas Instruments datasheets.

What are the typical applications for these ADCs?

Both devices target industrial data acquisition, process control, instrumentation, and medical systems requiring bipolar input ranges. The ADS7809UB suits designs needing 16-bit precision with minimal digital I/O (serial), while the ADS7804UE4 suits systems with a parallel bus and 12-bit resolution requirements.

What supply voltage and power consumption do these devices require?

Both the ADS7809UB and ADS7804UE4 operate from a +5 V analog supply and a +5 V digital supply (dual-supply configuration). Typical power consumption is on the order of 100 mW for each device under nominal conditions. Exact limits should be confirmed in the respective Texas Instruments datasheets.