AM26LS32ACDR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2449 PCS
- Package
- SOIC-16
- Series
- 인터페이스 - 드라이브, 수신기, 트랜시버
AM26LS32ACDR과 AM26LS31CDE4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AM26LS32ACDR and AM26LS31CDE4 are not functionally interchangeable: the AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDE4 is a quad differential line driver. Their signal direction, I/O architecture, and electrical roles are fundamentally different, so one cannot directly substitute for the other in a given circuit position.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS32ACDR | AM26LS31CDE4 | Why it matters |
|---|---|---|---|
| Function | Quadruple differential line receiver | Quadruple differential line driver | A receiver and a driver serve opposite roles in a differential link; they are not directly interchangeable in the same socket. |
| Number of Drivers/Receivers | 0 drivers / 4 receivers | 4 drivers / 0 receivers | Determines the direction of signal flow and whether the device can transmit or receive on a differential bus. |
| Output Type | Tri-state differential outputs (receiver outputs) | Tri-state differential line driver outputs | Output structure affects bus sharing, loading, and how the device interfaces with the transmission line. |
| Input Type | Differential line receiver inputs | TTL-compatible single-ended driver inputs | The input interface must match the upstream signal source; receivers accept differential pairs while drivers accept logic-level signals. |
| Supply Voltage (Vcc) | 5 V nominal | 5 V nominal | Both operate from a 5 V supply, so power rail compatibility is maintained across the pair. |
| Package / Mounting | SOIC-16, surface mount | SOIC-16, surface mount | Matching package and footprint allows either device to be placed on the same board layout. |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C | Identical commercial temperature ratings mean both suit the same ambient operating environments. |
| Standard Compliance | Meets RS-422, RS-423, and RS-485 receiver requirements | Meets RS-422 and RS-423 driver requirements | Standards compliance defines which serial interface protocols the device can legally and reliably support. |
| Data Rate Capability | Up to 10 Mbps (typical) | Up to 10 Mbps (typical) | Similar maximum data rates indicate comparable throughput for high-speed differential signaling applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LS31CDE4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Receiver | Driver |
| Protocol | RS422, RS423 | RS422, RS485 |
| Number of Drivers/Receivers | 0/4 | 4/0 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
| Receiver Hysteresis | 50 mV | - |
The AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDE4 is a quad differential line driver. The receiver is designed to convert balanced differential input signals into TTL-compatible outputs, whereas the driver converts TTL inputs into balanced differential outputs compliant with RS-422 and RS-485 signaling standards.
No. Although both devices are offered in a 16-pin SOIC package (the "D" suffix on the AM26LS32ACDR and the "D" package on the AM26LS31CDE4), their pin functions differ. The AM26LS32ACDR provides receiver inputs, receiver outputs, and an enable pin, while the AM26LS31CDE4 provides driver inputs, differential outputs, and an enable pin. They cannot be substituted for one another without redesigning the circuit.
Both devices operate from a single 5 V nominal supply. The AM26LS32ACDR is specified for a 5 V supply with a typical operating range of 4.75 V to 5.25 V, and the AM26LS31CDE4 is likewise specified for 5 V operation. Both are members of the AM26LS31/AM26LS32 family of 5 V RS-422/RS-485 interface devices.
Yes, both are designed for balanced differential signaling consistent with the RS-422 and RS-485 standards. The AM26LS31CDE4 driver produces differential outputs meeting RS-422 requirements, and the AM26LS32ACDR receiver accepts differential inputs with the common-mode range and sensitivity specified for these standards. They are commonly used together as a driver/receiver pair on the same bus.
Both devices are specified for the commercial temperature range of 0°C to 70°C. The "C" in the AM26LS31CDE4 suffix and the "AC" grade of the AM26LS32ACDR denote commercial-temperature versions of these interface ICs.
Yes. Because one is a quad receiver and the other is a quad driver, they are complementary and are frequently paired to form the receive and transmit sides of an RS-422 or RS-485 interface. A typical arrangement uses the AM26LS31CDE4 to drive the differential bus and the AM26LS32ACDR to receive differential signals from the bus, with each device's enable pins used to control transmit and receive activity.
Both the AM26LS32ACDR and the AM26LS31CDE4 are supplied in a 16-pin SOIC (small-outline integrated circuit) package. The "E4" suffix on the AM26LS31CDE4 denotes a lead-free (RoHS-compliant) finish, and the AM26LS32ACDR is likewise offered in RoHS-compliant packaging per the manufacturer's ordering information. Designers should confirm the specific orderable part number's compliance status against the current manufacturer datasheet.