AM26LS32ACDR vs AM26LS32ACDE4

AM26LS32ACDR과 AM26LS32ACDE4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26LS32ACDR and AM26LS32ACDE4 are functionally equivalent quad differential line receivers sharing identical device specifications, with the only distinction being the tape-and-reel versus tube packaging format. Both parts are suitable for the same RS-422/RS-423 and TIA/EIA-422/423 applications, and the choice between them should be driven solely by the assembly and procurement packaging requirements rather than by any electrical or functional difference.

Function and Device Type High match
Package and Pinout High match
Electrical Specifications High match
Packaging and Ordering Format Validation required

Parts at a glance

Part A

AM26LS32ACDR

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
2449 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버
Part B

AM26LS32ACDE4

텍사스 인스트루먼트(주)

Lifecycle
Active
Stock
9006 PCS
Package
SOIC-16
Series
인터페이스 - 드라이브, 수신기, 트랜시버

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LS32ACDR AM26LS32ACDE4 Why it matters
Function Quadruple differential line receiver Quadruple differential line receiver Both devices perform the same core function, so they are functionally interchangeable in a circuit.
Number of Receivers 4 4 The receiver count must match the number of differential signal channels required by the design.
Supply Voltage (VCC) 5 V (4.75 V to 5.25 V) 5 V (4.75 V to 5.25 V) The operating supply range must be compatible with the system power rail for correct operation.
Input Type Differential Differential Differential inputs provide noise immunity and are required for RS-422/RS-485 style signaling.
Output Type 3-state (tri-state) 3-state (tri-state) Tri-state outputs allow multiple receivers to share a common bus without contention.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C The temperature range must cover the application environment for reliable operation.
Package / Mounting 16-SOIC, surface mount 16-SOIC, surface mount Package and mounting style must match the PCB footprint for physical compatibility.
Pin Count 16 16 Pin count and pinout must match to allow drop-in replacement on an existing board.
RoHS Compliance RoHS compliant RoHS compliant RoHS status affects regulatory compliance and suitability for commercial products.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LS32ACDR AM26LS32ACDE4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Receiver Receiver
Protocol RS422, RS423 RS422, RS423
Number of Drivers/Receivers 0/4 0/4
Receiver Hysteresis 50 mV 50 mV
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Operating Temperature 0°C ~ 70°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AM26LS32ACDR and AM26LS32ACDE4?

Both are quad differential line receivers from Texas Instruments that meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, and ITU Recommendation V.10/V.11. They are functionally identical devices; the difference lies in the ordering suffix, which denotes package and packing configuration.

What is the difference between the AM26LS32ACDR and AM26LS32ACDE4?

The AM26LS32ACDR is supplied in a 16-pin SOIC package on large tape-and-reel (reel) packing, while the AM26LS32ACDE4 is the same 16-pin SOIC device in a tube/rail packing configuration. The "E4" suffix indicates Pb-free (RoHS-compliant) tube packaging; both parts are electrically and functionally equivalent.

Are the AM26LS32ACDR and AM26LS32ACDE4 electrically interchangeable?

Yes. Both devices share the same datasheet specifications: quad differential receivers with ±7 V common-mode range, 3-state outputs, and input sensitivity of ±200 mV. They differ only in shipping/packaging format, so they are interchangeable in circuit design.

What supply voltage do these receivers require?

Both the AM26LS32ACDR and AM26LS32ACDE4 operate from a single 5 V supply (nominal), with the datasheet specifying a recommended operating supply voltage of 4.75 V to 5.25 V.

What is the input common-mode voltage range of these devices?

The AM26LS32ACDR and AM26LS32ACDE4 both feature a common-mode input voltage range of ±7 V, allowing them to handle ground potential differences in balanced transmission systems.

Do these receivers have three-state outputs?

Yes. Both the AM26LS32ACDR and AM26LS32ACDE4 provide three-state (tri-state) outputs controlled by a common enable pin, permitting direct connection to a bus-oriented system.

What package type do the AM26LS32ACDR and AM26LS32ACDE4 use?

Both parts are offered in a 16-pin SOIC (small-outline integrated circuit) package. The "D" in the part number designates the SOIC package; the "R" suffix indicates tape-and-reel, and the "E4" suffix indicates Pb-free tube packing.

Which standards do the AM26LS32ACDR and AM26LS32ACDE4 comply with?

Both devices are designed to meet TIA/EIA-422-B, TIA/EIA-423-B, and ITU Recommendation V.10/V.11 standards for balanced and unbalanced digital data transmission.