AM26LS32ACDR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2449 PCS
- Package
- SOIC-16
- Series
- 인터페이스 - 드라이브, 수신기, 트랜시버
AM26LS32ACDR과 AM26LS32AIDE4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AM26LS32ACDR and AM26LS32AIDE4 are functionally equivalent quad differential line receivers sharing the same core architecture, logic family, and electrical characteristics, making them viable substitutes in most designs. The primary distinction lies in package and qualification grade, so the AM26LS32AIDE4 serves as a suitable replacement for the AM26LS32ACDR where the enhanced temperature and reliability specifications are acceptable, provided the package footprint is compatible with the target board layout.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS32ACDR | AM26LS32AIDE4 | Why it matters |
|---|---|---|---|
| Function | Quadruple differential line receiver | Quadruple differential line receiver | Both devices perform the same core function, so they are functionally interchangeable in receiver applications. |
| Number of Receivers | 4 | 4 | Matching receiver count ensures the same number of differential channels can be handled in the target design. |
| Supply Voltage (VCC) | 5 V (4.75 V to 5.25 V) | 5 V (4.75 V to 5.25 V) | Identical supply requirements allow the parts to be used in the same power rail configuration without redesign. |
| Receiver Input Type | Differential (RS-422/RS-423 compatible) | Differential (RS-422/RS-423 compatible) | Same input compatibility ensures both parts interface with the same differential signaling standards. |
| Output Type | 3-state (tri-state) outputs | 3-state (tri-state) outputs | Tri-state outputs allow bus sharing; matching this behavior preserves bus arbitration and multiplexing designs. |
| Operating Temperature Range | 0°C to 70°C | -40°C to 85°C | The wider industrial temperature range of the AIDE4 variant matters for harsh-environment or industrial applications. |
| Package / Mounting | SOIC-16, surface mount | SOIC-16, surface mount | Package and mounting must match the PCB footprint; both use SOIC-16, so board layout is compatible. |
| Qualification / Grade | Commercial grade | Industrial grade | Grade differences affect environmental robustness and suitability for industrial versus commercial deployments. |
| RoHS Compliance | RoHS compliant | RoHS compliant | Both meet RoHS, so environmental compliance requirements are satisfied by either part. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LS32AIDE4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Receiver | Receiver |
| Protocol | RS422, RS423 | RS422, RS423 |
| Number of Drivers/Receivers | 0/4 | 0/4 |
| Receiver Hysteresis | 50 mV | 50 mV |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Both are quad differential line receivers from Texas Instruments that meet the requirements of TIA/EIA-422-B and TIA/EIA-423-B, as well as ITU Recommendation V.10 and V.11. They are designed to receive balanced or unbalanced digital data over twisted-pair or parallel-wire lines.
The primary difference is the package and ordering designation. The AM26LS32ACDR is supplied in a 16-pin SOIC package (D suffix) on a large tape-and-reel (R suffix), while the AM26LS32AIDE4 is supplied in a 16-pin SOIC package (D suffix) in a tube (E4 suffix). Both use the same die and electrical specifications.
Yes. Both devices share the same datasheet and electrical characteristics, including input sensitivity of ±200 mV, common-mode voltage range of ±7 V, and a typical propagation delay of 17 ns. The only differences are packaging and shipping format.
Both the AM26LS32ACDR and AM26LS32AIDE4 are specified for operation over the industrial temperature range of –40°C to 85°C, as stated in the Texas Instruments datasheet.
Yes, from an electrical and footprint perspective they are interchangeable because both are 16-pin SOIC devices with identical pinouts. The choice between them depends on the assembly method: the CDR is intended for automated reel-fed pick-and-place, while the IDE4 is supplied in tubes for manual or low-volume assembly.
Both devices operate from a single 5 V supply (nominal), with a specified supply voltage range of 4.75 V to 5.25 V. Typical supply current is 70 mA, per the Texas Instruments datasheet.
The AM26LS32A family does not include a fail-safe feature that forces a defined output when inputs are open or terminated. Designers should provide external biasing if a defined output state is required under open-line conditions.
Both devices provide 3-state (tri-state) outputs, allowing them to be connected to a common bus. The output enable function is controlled via the enable pins, as specified in the Texas Instruments datasheet.