AM26LS32ACDR
텍사스 인스트루먼트(주)
- Lifecycle
- Active
- Stock
- 2449 PCS
- Package
- SOIC-16
- Series
- 인터페이스 - 드라이브, 수신기, 트랜시버
AM26LS32ACDR과 AM26LS31CDG4에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AM26LS32ACDR and AM26LS31CDG4 are not functionally interchangeable despite sharing the same RS-422/RS-485 family and SOIC-16 footprint. The AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDG4 is a quad differential line driver, so their signal direction, I/O architecture, and application roles are fundamentally different. Substitution is not possible without redesigning the interface around the opposite function.
텍사스 인스트루먼트(주)
텍사스 인스트루먼트(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LS32ACDR | AM26LS31CDG4 | Why it matters |
|---|---|---|---|
| Function | Quadruple differential line receiver | Quadruple differential line driver | Receiver and driver are complementary but not interchangeable; a receiver cannot transmit and a driver cannot receive, so they serve opposite ends of a differential link. |
| Number of Drivers | 0 | 4 | The driver count determines how many differential output channels are available to transmit signals onto a bus. |
| Number of Receivers | 4 | 0 | The receiver count determines how many differential input channels can be monitored from a bus. |
| Output Type | 3-state (tri-state) outputs | 3-state (tri-state) outputs | Tri-state outputs allow devices to be disconnected from a shared bus, enabling multi-drop configurations without contention. |
| Supply Voltage (Vcc) | 5 V (4.75 V to 5.25 V) | 5 V (4.75 V to 5.25 V) | Both require a nominal 5 V supply, so the same power rail can be used, but the function still differs. |
| Package / Mounting | SOIC-16, surface mount | SOIC-16, surface mount | Identical package and footprint allow either part to be placed on the same board location, though the circuit role differs. |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C | Commercial temperature range suitability is the same for both, so environmental constraints do not distinguish them. |
| Standard Compliance | Meets TIA/EIA-422-B and TIA/EIA-423-B (RS-422/RS-423) | Meets TIA/EIA-422-B and TIA/EIA-423-B (RS-422/RS-423) | Both comply with the same differential signaling standards, so they can be paired in a compliant RS-422/RS-423 link. |
| Input/Output Logic | Differential inputs, TTL-compatible outputs | TTL-compatible inputs, differential outputs | The signal direction is opposite: the receiver converts differential to single-ended, while the driver converts single-ended to differential. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LS31CDG4 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | Receiver | Driver |
| Protocol | RS422, RS423 | RS422, RS485 |
| Number of Drivers/Receivers | 0/4 | 4/0 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
| Receiver Hysteresis | 50 mV | - |
The AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDG4 is a quad differential line driver. The AM26LS32ACDR is designed to receive balanced differential signals and convert them to TTL-compatible outputs, whereas the AM26LS31CDG4 is designed to transmit TTL-level signals as balanced differential outputs compliant with RS-422 and RS-485 signaling standards.
No. Although both devices are offered in a 16-pin SOIC package (D suffix), they are not functionally interchangeable. The AM26LS32ACDR is a receiver with input pins and tri-state outputs, while the AM26LS31CDG4 is a driver with TTL inputs and differential outputs. Pin functions and internal circuitry differ, so one cannot directly replace the other in a circuit without redesign.
The AM26LS32ACDR receiver is designed for balanced differential data transmission and is compatible with RS-422, RS-423, and RS-485 signaling. The AM26LS31CDG4 driver is specified for RS-422 and RS-485 balanced differential transmission. Both devices are commonly used in serial data communication applications, and their maximum data rate depends on the external termination and cable characteristics as specified in the respective manufacturer datasheets.
Both devices operate from a single 5 V nominal supply. The AM26LS32ACDR is specified over the commercial temperature range of 0°C to 70°C. The AM26LS31CDG4 is also specified over the commercial temperature range of 0°C to 70°C. Designers should consult the respective manufacturer datasheets for exact recommended operating conditions and absolute maximum ratings.
Yes. Because one is a driver and the other is a receiver, they are complementary devices. The AM26LS31CDG4 can transmit differential signals over a balanced twisted-pair cable, and the AM26LS32ACDR can receive those signals at the other end of the link. This driver/receiver pairing is a common configuration in RS-422 and RS-485 communication systems.
The AM26LS32ACDR is supplied in a 16-pin SOIC package (D suffix, tape and reel). The AM26LS31CDG4 is supplied in a 16-pin SOIC package (D suffix, tube or rail packaging per the DG4 ordering code). Both are surface-mount SOIC-16 packages, but the ordering suffixes indicate different packaging and temperature grade conventions from the manufacturer.
The AM26LS32ACDR receiver includes a tri-state output enable function, allowing the outputs to be placed in a high-impedance state for bus sharing. The AM26LS31CDG4 driver includes an output enable function that places the differential outputs in a high-impedance state when disabled. Designers should verify the exact enable logic polarity and fail-safe behavior in the manufacturer datasheet for each device.